Active Unanswered
Lovett bilge pump location for 1956 21 ' Capri
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 91
- Joined: Tue Jan 09, 2007 7:23 pm
- Contact:
Lovett bilge pump location for 1956 21 ' Capri
What is the best location for a Lovett bilge pump in a 1956 21' Capri.it will not fit where the hull drain is with the "T " handle==should it go just aft or forward of the hull drain or another location, Thanks for any info JW
Re: Lovett bilge pump location for 1956 21 ' Capri
Can't say for on your boat, but I can tell you the on a 1957 21' Continental it is forward of the hull drain, so I would suspect that a year older Capri would be similar.
Troy in ANE - Former President CCABC
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
Re: Lovett bilge pump location for 1956 21 ' Capri
If your T Handle drain is adjacent to the keel then you can mount the bilge pump directly to the keel next to the T Handle drain as long as you have the room.
I cut a square hole in the seat frame bottom and install a clear removable door so I could see the pump and access it without removing the seat frame.
Mark
I cut a square hole in the seat frame bottom and install a clear removable door so I could see the pump and access it without removing the seat frame.
Mark
1953 CC Rocket Runabout "Rocket Man"
Who is online
Users browsing this forum: No registered users and 1 guest