Active Unanswered
Cold weather varnishing
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 62
- Joined: Tue Oct 03, 2017 7:31 pm
- Location: Hammond, LA
- Contact:
Cold weather varnishing
As I approach the varnishing stage of my project, I am growing slightly concerned about the climate in which I will have for varnishing. I know Pettit says "Temps 50 degrees Fahrenheit and below will extend drying times considerably" which is obviously understandable, but just wanting to make sure that extended drying times is the only concern I should have. My local temp will stay between 30-60 degrees pretty much 90% of the time. And I know I'll have to keep an eye on humidity and how thick I lay it on. But does anyone have anyone have any big red flags I should look out for while varnishing in the 30 degree temp range? Should I avoid that at all costs? If longer dry time is all I have to worry about then that's no problem, but if anyone has some horror story about low temp varnishing then I'll have to figure something out. Any input is greatly appreciated
Current Project: 1950 Chris Craft Sportsman 18'
-
- Posts: 400
- Joined: Wed Mar 08, 2006 2:49 pm
- Location: Indian Lake, Ohio
- Contact:
Re: Cold weather varnishing
At thirty degrees your gonna need two hands to drag the brush. I'd wait for warmer weather.
Greg Wallace 23 Custom 22166 former Chris-Craft dealer Russells Point, Oh.
-
- Posts: 62
- Joined: Tue Oct 03, 2017 7:31 pm
- Location: Hammond, LA
- Contact:
Re: Cold weather varnishing
Well I have no problem warming the building to 50-55 degrees for a few hours to apply the varnish, but over night the ambient temps will be dropping into the 30's, so I was wondering if those lows would damage the varnish before it cures in some way?
Current Project: 1950 Chris Craft Sportsman 18'
-
- Posts: 400
- Joined: Wed Mar 08, 2006 2:49 pm
- Location: Indian Lake, Ohio
- Contact:
Re: Cold weather varnishing
You may be trying something none of us has experienced. I would call Pettit and see what they have to say. I would be interested in their reply.
Greg Wallace 23 Custom 22166 former Chris-Craft dealer Russells Point, Oh.
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Cold weather varnishing
Working on big cruisers in Portland Oregon I had to varnish in cold weather. I used epifanes varnish at the time and on a regular basis varnished in 50 degree weather it then got colder after dark. I would have really good results with the flow and flattening out because it had more time to settle and the brush strokes to come together. The biggest disadvantage is the dry time. I could only coat every other day due to the dry time. I got the boathouse as warm as I could get it (about 50 degrees in the winter) and then apply my varnish, I would shut the heat off for the night and then in the morning turn the heaters back on and work on something else while the varnish from the day before cured. I would have to wait 48 hours before I scotch brighted or sanded and then applied another coat. I am sure this same process would work with Pettit captains but with a high build varnish you may have to wait even longer before the next coat.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
- robertpaul
- Posts: 337
- Joined: Mon May 13, 2013 2:35 pm
- Contact:
Re: Cold weather varnishing
Did you experience runs or sagging on vertical surfaces due to the extended drying time? I am sure you were careful to apply thin coats, but with the longer time required for the solvents to flash, I am curious if this was a problem.
1937 35' Double Stateroom Enclosed Cruiser
Re: Cold weather varnishing
Paint and varnish sag is caused by too thick and heavy applications. Make sure your varnish is warm, dip your brush tip 1/4 inch only.
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Cold weather varnishing
Not really, it was about 50 when it was applied so it skimmed over so there really wasn't difference. It just took longer to fully cure.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Who is online
Users browsing this forum: No registered users and 3 guests