Active Active   Unanswered Unanswered

Restoration Progress

This is a general discussion area for those who are interested in Chris-Craft's connection with Gar Wood, the man, and the Company.

Moderators: Don Ayers, Al Benton, Don Vogt

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Restoration Progress

Post by mattbyrne » Thu Jan 22, 2009 1:49 pm

The Gar Wood section has been very quiet so I thought I post a couple of pics on my progress. I took a couple of weeks off around the holidays and got some "quality" time on the boat. I have the framing complete, new stem and gripe fit, new keel with rabbit cut and the chines are steam bent waiting final fitting and plank rabbit. Here are some photos.

Image

Image

Image

cenger
Posts: 218
Joined: Thu Jun 29, 2006 7:42 am
Contact:

Post by cenger » Thu Jan 22, 2009 2:16 pm

Nice, what year and model? I have ’35 Split Cockpit basket cases that ready for new bottom, frames and keel. I had to work a bit backward by doing some topside framing first. Topsides were so shot I didn’t think they could support the boats own weight when flipped over. Getting excited, engine is down at VanNess, Gauges at Clawson’s and Chrome just came back from Graves ($5K for chrome Ouch!).

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Post by mattbyrne » Thu Jan 22, 2009 2:49 pm

It's a 1939 19' Custom Runabout Model 912

btw Does anyone know what changed in 1940 to make it a deluxe runabout?

Oberon01
Posts: 295
Joined: Thu Aug 23, 2007 9:42 pm
Location: Calgary, Alberta
Contact:

Post by Oberon01 » Thu Jan 22, 2009 5:57 pm

I can't answer the question, but I can report good progress being made on the restoration of my '46 22' 6" Sedan. It is being done by Dave Jerome in Portland and he's been at it for nearly three months. All the frames are done, transom is done and battens in. New planking should be arriving this week. The chrome has been completed, the engine is ready for re-assembly and the gauge cluster is with Kocian. Just have to work out the correct color for the canvas top and sort out the interior. Interior is in very good shape but it is not correct. Will probably replace with a new and correct interior. Hope to have it wet this summer.

User avatar
Brian Robinson
Posts: 777
Joined: Thu Oct 27, 2005 10:49 pm
Location: Southern California
Contact:

Post by Brian Robinson » Thu Mar 12, 2009 10:44 pm

Matt,

The 19' R/A was still called a Custom Runabout in 1940. The two boats (1939 and 1940 models) are completely identical except for mid-way through 1940 they added the flare details to the covering boards and king planks like the larger boats already had (this occurred somewhere around hull #6454) and added two pleats in the middle of the seat backs. They also used a slightly different gauge panel.

The 1941 and 1942 19'6" R/A's were called Deluxe Runabouts (or "De Luxe" Runabouts). These were redesigned with the biggest difference being the raked aft barrel transom, which added 6" to the length.

The model name changes that came in for 1941 applied to nearly every model, versus that of 1940. The 1941 Gar Woods were the design pinnicle of the companies boat production, IMHO. The 1942 boats were equally good, and extremely rare, with a total of only eight "civilian" boats produced that year.
Image
Last edited by Brian Robinson on Sat Aug 08, 2009 1:46 pm, edited 3 times in total.
-Brian
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009

User avatar
Mark Christensen
Posts: 639
Joined: Wed Jul 19, 2006 5:57 am
Location: Rockford, IL
Contact:

Post by Mark Christensen » Fri Mar 13, 2009 10:39 am

Is all of this in the classic boat wiki?
1961 24' Chris Craft Sportsman - CUA-24-0007C
1940's Homebuilt 14' Racing Hydroplane
Image

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Sun Jan 17, 2010 11:04 pm

Matt;

Save all the parts and take a lot of pics for me :D


Image

Image

Image
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Time for an update

Post by mattbyrne » Sun Jan 31, 2010 2:55 pm

Well Its been a while so I thought I'd post some updated pictures.


Image

Image

Image

Image
[/img]

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Sun Jan 31, 2010 3:48 pm

Matt;

Very nice work, Thanks for posting.

At this stage are those bottom planks just dry fit at the moment?

I would like to see if you have any pics of the inner bottom going on with all those little hourglass blocks that GW's are famous for.
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Post by mattbyrne » Sun Jan 31, 2010 8:15 pm

Inner ply is glued down (5200) and outer planknig is just dry fit for now. I hope to take it all apart and glue everything down in the next week or two.

Not sure what you mean by "hourglass blocks" but
here are couple pictures of the inner ply.

Image

Image

cenger
Posts: 218
Joined: Thu Jun 29, 2006 7:42 am
Contact:

Post by cenger » Mon Feb 01, 2010 10:15 am

Wow Don, I thought I had a Grey Gar Wood. You Win!

Here are a few progress shots.

Image

Image

User avatar
1948 Deluxe
Posts: 3
Joined: Tue Oct 24, 2006 9:34 am
Contact:

Grey Gar's

Post by 1948 Deluxe » Mon Feb 01, 2010 5:07 pm

I spoke with Matt some time ago. I have 2 1941 19'-6" Deluxe Runabouts, here's the greyest! The other is complete with the bottom off. The "plan" is to do them together side by side. Nice to see someone getting further along on a Gar project than I.
Bob Shapton
Image

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Post by drrot » Mon Feb 01, 2010 5:44 pm

Bob,
Did one of your projects look like this?

Image
Jim Staib
www.finewoodboats.com


1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

User avatar
1948 Deluxe
Posts: 3
Joined: Tue Oct 24, 2006 9:34 am
Contact:

Post by 1948 Deluxe » Mon Feb 01, 2010 6:18 pm

Oh yea! That's the one I bought from Maury DeBell. Looks about the same, probably a few pounds lighter from all the moving around. This is hull number is 6706. Shortly after buying this wreck, I bought #6751 which according to Tony Mollica is the last one built in 1941. Somewhere during the two also picked up #6696 a 1941 18'-6" Comet from Jeff Rogers. Shit, their gorgeous before you start the work!

Image
#6751


Image
#6696 w/19'-6" folding V windshield for 6706

User avatar
Mango
Posts: 35
Joined: Fri Mar 20, 2009 7:34 pm
Location: Connecticut
Contact:

Re: Restoration Progress

Post by Mango » Mon Feb 08, 2010 8:42 pm

mattbyrne wrote:The Gar Wood section has been very quiet so I thought I post a couple of pics on my progress. I took a couple of weeks off around the holidays and got some "quality" time on the boat. I have the framing complete, new stem and gripe fit, new keel with rabbit cut and the chines are steam bent waiting final fitting and plank rabbit. Here are some photos.

Image

Image

Image
Wow, if you did all that in two weeks, congratulations! Nice work.
1948 CC Deluxe
2002 Chaparral Signature 260

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Post by mattbyrne » Tue Feb 09, 2010 9:16 am

Sorry I didn't mean to inply that all that work was done in 2 weeks. I started 1-1/2 years ago!

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Big Milestone

Post by mattbyrne » Mon Mar 22, 2010 9:25 pm

Well tonoght was the big night I flipped the back upright the bottom is done! Not to self never do another bottom. Here is some pictures

Image
Planks glued down
Image
One side sanded
Image
Barrier Coat
Image
Paint
Image
The flip
Image
Ready for the next step/.

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Mon Mar 22, 2010 9:47 pm

fantastic work Matt. You should be very proud and that boat has beautiful lines doesn't it
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

User avatar
Brian Robinson
Posts: 777
Joined: Thu Oct 27, 2005 10:49 pm
Location: Southern California
Contact:

Post by Brian Robinson » Mon Mar 22, 2010 10:28 pm

We have the sister to Matt's '39 19' Gar underway as a long term project for a customer. These two boats were consecutively built and are identical models. Really neat boats.

Image

Image
-Brian
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Tue Mar 23, 2010 5:32 am

I love the crown the Gar's had. Wish CC had not flattened out their decks in the late 30's and early 40's.

I've had the pleasure to ride in one of these and it really does kick A**. The Gar's generally have a deeper entry don't pound as much.

Looks great Brian! Thanks for sharing.
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

User avatar
Don Vogt
Club Executive Team
Posts: 919
Joined: Mon Jan 01, 2007 4:51 pm
Location: seattle, wa

Post by Don Vogt » Tue Mar 23, 2010 7:04 am

I agree Don. Do you think the crowning was purely aesthetic or were there some other reasons, too for crowning? I guess the water runs off better for one thing.

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Tue Mar 23, 2010 8:47 am

Good question. I really don't know. I would think it was purely cosmetic in nature as it would not affect performance.
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

User avatar
Mark Christensen
Posts: 639
Joined: Wed Jul 19, 2006 5:57 am
Location: Rockford, IL
Contact:

Post by Mark Christensen » Tue Mar 23, 2010 11:58 am

If only I could be where you are now..... good job matt!
1961 24' Chris Craft Sportsman - CUA-24-0007C
1940's Homebuilt 14' Racing Hydroplane
Image

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

New fuel tank, paint it?

Post by mattbyrne » Sat Oct 09, 2010 6:38 pm

I had rayco make me a new tank a few months back. Should I paint it bilge color or leave bare aluminum? If painted how does one prepare the aluminum to accept paint?

User avatar
Brian Robinson
Posts: 777
Joined: Thu Oct 27, 2005 10:49 pm
Location: Southern California
Contact:

Post by Brian Robinson » Sat Oct 09, 2010 10:30 pm

Paint it bilge color, Matt.

We use a zinc chromate primer when painting aluminum.

The straps are black.
-Brian
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009

User avatar
Bill Basler
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

Post by Bill Basler » Sat Oct 09, 2010 10:56 pm

I agree with Brian. To take it a step farther, you can wash the tank with a product known as Zing...or also ’ToonBrite. Both of these products are acids, intended for use on aluminum. They are often used to eat the scum lines off of aluminum boats that are kept in the water, ie: pontoons, or ’Toons.

This will eat off all of the oxidation, which can keep paints from adhering properly on aluminum. Then, as Brian suggests, use a Zinc Chromate Primer. I think Krylon makes an acid etch Zinc Chromate type primer that works pretty well if you are going to prime with a spray can.
Bill Basler

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Post by mattbyrne » Sun Oct 10, 2010 11:50 am

Thanks guys, one question on the black paint for straps what type of finish, satin, gloss, flat? (maybe I'm over thinking this one)

User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma
Contact:

Post by Don Ayers » Sun Oct 10, 2010 1:38 pm

matt;

you are not over thinking anything. that is what you have to do to get things as accurate as possible. Don't assume anything!!!
Don Ayers
1959 Riva Ariston
www.RivaForum.org
www.barrelback.com

cenger
Posts: 218
Joined: Thu Jun 29, 2006 7:42 am
Contact:

Post by cenger » Sat Nov 13, 2010 9:27 pm

Can anyone suggest the best way to cut the rabbits into the chine and keel for secondary frames on a Gar Wood? I’m thinking of using my laminate trimmer but it would leave a rounded off edge instead of a clean square edge that the original had.

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Post by mattbyrne » Wed Mar 02, 2011 8:51 am

Well the Gar Wood section has been a very quite, so I thought I give an upate on my restoration.

I threw in the towel and sent the boat off to have the pro's do the planking. It was a tough decision but I just do not have the time to work on the boat. I'm still planning on doing the finish and interior.

I got word last week that my engine is done and ready for a first start up. We hope to do that this weekend. Below are some pictures. I know it's over detailed, (originally none of the brass was polished) and I still need to track down an exhaust elbow, but I think it turned out good.

Image

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest