Hi- I recently purchased a 1973 23' Lancer. I washed the deck but it still has stains and rust spots, anyone know what to use on this to get rid of them? Also, the hull is in good shape except for a few minor scratches. Do I need to lightly sand these and then buff the whole bottom? What are the best compounds, etc to use? Thanks so much for any info!!!!
Active Unanswered
Interior decking /Hull paint HELP
Moderators: Don Ayers, Al Benton, Don Vogt
- Driftwood67
- Posts: 4
- Joined: Fri Oct 03, 2008 12:36 pm
- Contact:
Whink Rust Stain Remover
We use Whink. It works great on rust stains on fiberglass, paint, cloth, etc. It is powerful. I have bought it at Ace Hardware and other places that carry cleaning supplies. It comes in a small, plastic brown bottle, not very expensive.
Your boat looks almost as bad as ours did when we got it last year. Where are you located?
We are in the process of rebuilding the HEAVY floor hatches out of Plascore. Also replacing the back bulkhead and backseat using the same Plascore honeycomb material.
susie
Your boat looks almost as bad as ours did when we got it last year. Where are you located?
We are in the process of rebuilding the HEAVY floor hatches out of Plascore. Also replacing the back bulkhead and backseat using the same Plascore honeycomb material.
susie
"Cheers"
1974 23' Lancer
Mercruiser 350 MPI Straight Inboard (1998)
Sausalito, CA
1974 23' Lancer
Mercruiser 350 MPI Straight Inboard (1998)
Sausalito, CA
- Paul P
- Posts: 622
- Joined: Mon Oct 30, 2006 1:48 pm
- Location: Nashville, Tennessee, Cumberland River and Lake system
- Contact:
I also have to do a floor hatch, my 1973 inboard came without a motor, transmission, motor box or floor hatches.
Here is a photo of the Lancer the day it arrived, that is our 1966 fiberglass Sea Skiff (green) also sitting there in the driveway at the cottage.
http://img.photobucket.com/albums/v472/ ... dSkiff.jpg
The Lancer is now being disassembled in total, repairing various issues, etc. I have some structural damage (places where some of the top deck was apparently hit hard and there is a crack) that I have to ream out, fill with epoxy, and add support underneath in the form of a butt block of fiberglass matt to assure the crack will not reappear some day. Therefore my entire topsides will have to be painted and I am going to use Bill Basler's recommendation to go with Interlux PERFECTION - II. I think the hull gelcoat is the same as the Commander series, which the Ford auto color "Wimbledon White" was a very close match, maybe that would help with some minor touch up?
http://img.photobucket.com/albums/v472/ ... C00799.jpg
Best,
Paul
Here is a photo of the Lancer the day it arrived, that is our 1966 fiberglass Sea Skiff (green) also sitting there in the driveway at the cottage.
http://img.photobucket.com/albums/v472/ ... dSkiff.jpg
The Lancer is now being disassembled in total, repairing various issues, etc. I have some structural damage (places where some of the top deck was apparently hit hard and there is a crack) that I have to ream out, fill with epoxy, and add support underneath in the form of a butt block of fiberglass matt to assure the crack will not reappear some day. Therefore my entire topsides will have to be painted and I am going to use Bill Basler's recommendation to go with Interlux PERFECTION - II. I think the hull gelcoat is the same as the Commander series, which the Ford auto color "Wimbledon White" was a very close match, maybe that would help with some minor touch up?
http://img.photobucket.com/albums/v472/ ... C00799.jpg
Best,
Paul
1956 17' CC Sportsman, 300-hp
1957 17' CC Sportsman, 95-hp
1966 20' CC fiberglass Sea Skiff, 210-hp+
1973 23' CC Lancer inboard project, 427/375-hp.
1966 38' CC Commander Express, 427/300-hp(2)
So many boats.........so little time.....but what a way to go!!
1957 17' CC Sportsman, 95-hp
1966 20' CC fiberglass Sea Skiff, 210-hp+
1973 23' CC Lancer inboard project, 427/375-hp.
1966 38' CC Commander Express, 427/300-hp(2)
So many boats.........so little time.....but what a way to go!!
Lancer Seats
It looks like your seats might be savable. Ours were beige and orange, and I found a spray paint made by Sem that is specifically for painting leather and vinyl. We sprayed our seats with this paint using an off-white color following their directions exactly and you can't tell they have been painted. West Marine carries this paint or some automotive supply stores that specialize in restoration work may have it.
Sue
Sue
"Cheers"
1974 23' Lancer
Mercruiser 350 MPI Straight Inboard (1998)
Sausalito, CA
1974 23' Lancer
Mercruiser 350 MPI Straight Inboard (1998)
Sausalito, CA
Who is online
Users browsing this forum: No registered users and 5 guests