Does anyone have experience with the steering set up that goes through the BenMar. On my 42 SC the wheel is chain driven to the autopilot module and out through a control arm to the linkage that controls the rudders. After my surveyor " freed up the steering for me" I have no helm. The chain sprocket on the Benmar turns but the control arm does not move. Presently there is no Power to the unit, is that required to engage a clutch, or did he break something inside the unit? The initial problem was that the linkage at the rudders was frozen and he forced the wheel. I really could use some help on this. Oh and of course you have to be an elf to get to the unit to take it out.
Thanks Phil
Active Unanswered
Bendix 14 Autopilot
Moderators: Don Ayers, Al Benton, Don Vogt
Who is online
Users browsing this forum: No registered users and 3 guests