Active Unanswered
1942 17' Special Runabout Battery Box, Tool Box
Moderators: Don Ayers, Al Benton
1942 17' Special Runabout Battery Box, Tool Box
Hello, I am looking for some photos and/or diagrams of the battery box and tool box(?) and any other factory items located in the engine compartment of my 1942 17' Special Runabout. These items were missing when I bought the boat. Any assistance will be appreciated. Thanks! Jim
- Don Danenberg
- Posts: 181
- Joined: Fri Nov 18, 2005 9:30 pm
- Location: Manistee, MI
- Contact:
Re: 1942 17' Special Runabout Battery Box, Tool Box
These pages are scanned from an article I wrote in Classic Boating magazine in the Jan/Feb 2012 issue, #165.
The first tool box shown is for late 20's, early 30's.
The CAD drawings are for your '42, 17'.
The first tool box shown is for late 20's, early 30's.
The CAD drawings are for your '42, 17'.
- Don Danenberg
- Posts: 181
- Joined: Fri Nov 18, 2005 9:30 pm
- Location: Manistee, MI
- Contact:
Re: 1942 17' Special Runabout Battery Box, Tool Box
Oh Oh, the attachments didn't upload?
And now, they will upload backwards?
Read the photos from the bottom, up?
And now, they will upload backwards?
Read the photos from the bottom, up?
Re: 1942 17' Special Runabout Battery Box, Tool Box
GENTLEMEN, I HAVE A 1941 17 FT THAT HAS ORIGINAL TOOL BOX , (I THINK) IT HAS DIMENSIONS THE SAME BUT HAS SIDES AND BOTTOM WHICH MEASURE1/4 INCH IN THICKNESS AND 5d NAILS,NO SCREWS. ENDS AND PARTITION ARE 3/4 PLY 3 LAYERS TO EQUAL 3/4. WOULD THIS BE TRUE IN 41 AND NOT 42. JUST ASKING
-
- Posts: 26
- Joined: Tue May 14, 2019 3:55 pm
- Contact:
Re: 1942 17' Special Runabout Battery Box, Tool Box
GENTS, THE DIMENSIONS FOR THE ENGINE ROOM BOX ARE THEY INSIDE DIMENSIONS OR OUTSIDE DIMENSIONS?ALSO WHAT MATERIAL DID THEY USE FOR THE ENGINE ROOM BOX. THANKS JAKE
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: 1942 17' Special Runabout Battery Box, Tool Box
I've seen them built in a few different ways but mostly they were made from pine or butternut front and back and bottom and then deck planking for the sides which would be 3/8 to 1/2 mahogany. The dimensions are just as the artical was written with screws and nails. I have even seen deck seams in the side like they used some mahogany thay all ready had the deck seam cut into them. Follow the artical above but make it so it fits your battery and you will be good for the judges.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Who is online
Users browsing this forum: No registered users and 1 guest