Active Unanswered
Search found 38 matches
- Mon Mar 21, 2022 9:36 am
- Forum: Ask Hagerty
- Topic: Hagerty discontinues classic boat insurance
- Replies: 3
- Views: 3888
Hagerty discontinues classic boat insurance
I recently got a letter from Hagerty advising they are not going to renew the insurance on my 1938 Deluxe Runabout because Hagerty has decided to "discontinue the Classic Boat Program." Hagerty is switching to the Markel American Insurance Company as their new underwriter, and I should await a lette...
- Tue Oct 10, 2017 12:27 pm
- Forum: On the Hard
- Topic: Waterproofing for canvas cover?
- Replies: 5
- Views: 7782
Re: Waterproofing for canvas cover?
Thank you all for your recommendations. I'll check the web for information on each of these products to see what would be best for cotton canvas.
- Fri Oct 06, 2017 10:04 pm
- Forum: On the Hard
- Topic: Waterproofing for canvas cover?
- Replies: 5
- Views: 7782
Waterproofing for canvas cover?
The custom made canvas cover for my runabout is no longer waterproof, but is otherwise clean and serviceable. Can anyone with experience recommend a brand of waterproofer that will restore the cover without risk of damage to a freshly varnished boat? I'm afraid that waterproofing liquids that use pe...
- Fri Sep 27, 2013 1:45 pm
- Forum: Cockpit and Cabin Interiors
- Topic: Experienced upholsterer needed in Wisconsin
- Replies: 1
- Views: 2033
Re: Experienced upholsterer needed in Wisconsin
UPDATE: One of the other CC owners here on the lake recommended somebody local. I interviewed her and she has the skills, tools and knowledge to do my repairs and reupholstery for me.
- Fri Sep 27, 2013 8:54 am
- Forum: Cockpit and Cabin Interiors
- Topic: Experienced upholsterer needed in Wisconsin
- Replies: 1
- Views: 2033
Experienced upholsterer needed in Wisconsin
While laying up my 37 DeLuxe Runabout, I just discovered a spring has poked through the red vinyl (originally red russaloid) of one seat bottom and has torn the vinyl covering the adjoining seat back. I want to have both seat bottoms and seat backs repaired and recovered, and am in need of somebody ...
- Fri Nov 02, 2012 8:41 pm
- Forum: Odds & Ends
- Topic: What is it ?
- Replies: 30
- Views: 12118
The answer to your question is right there in the third and in the last photo: BONFIRE. Just strip out the few bits and bobs that might be of use to someone else first. Would you spend the same money to restore a Yugo or a Geo Metro automobile? Even it it cost exactly the same to restore a Mustang, ...
- Tue Sep 11, 2012 11:02 pm
- Forum: Engines & Powertrain
- Topic: Which spark plugs should I use with a "thin" head?
- Replies: 8
- Views: 3546
- Tue Sep 11, 2012 8:31 am
- Forum: Engines & Powertrain
- Topic: Which spark plugs should I use with a "thin" head?
- Replies: 8
- Views: 3546
I have read somewhere that the aluminum heads readily warped due to the different heat expansion rates between the iron block and the aluminum head. Did CC issue a recall or offer free iron heads if the aluminum one blew? Was the "thin" head on my engine something unique to replace warped aluminum h...
- Mon Sep 10, 2012 11:18 pm
- Forum: Engines & Powertrain
- Topic: Possible Overheating
- Replies: 9
- Views: 4307
I know. Boy, do I know. At least once a summer I've got to empty the sediment bowl under my fuel pump and rinse out the brass fuel filter in the carb. This is needed even though I use only pure gasoline. I had to do it more often when I ran gas with ethanol. I keep a small glass screw top jar and a ...
- Mon Sep 10, 2012 10:57 pm
- Forum: Engines & Powertrain
- Topic: Which spark plugs should I use with a "thin" head?
- Replies: 8
- Views: 3546
- Sun Sep 09, 2012 6:30 pm
- Forum: Engines & Powertrain
- Topic: Which spark plugs should I use with a "thin" head?
- Replies: 8
- Views: 3546
Which spark plugs should I use with a "thin" head?
My 1938 DeLuxe Runabout has its original KA 95hp engine, but the aluminum head was at some point in the past replaced with something called a "thin" head made of iron. My 1938 engine instruction book specifies Champion H-10 spark plugs for both the KA and KB aluminum head engines, which have 7.5 : 1...
- Sun Sep 09, 2012 5:44 pm
- Forum: Engines & Powertrain
- Topic: Possible Overheating
- Replies: 9
- Views: 4307
- Mon May 16, 2011 8:43 am
- Forum: Shows, Museums, & Event Locations
- Topic: ACBS 100 Point Judging Format
- Replies: 3
- Views: 3687
- Fri May 13, 2011 2:52 pm
- Forum: Shows, Museums, & Event Locations
- Topic: ACBS 100 Point Judging Format
- Replies: 3
- Views: 3687
ACBS 100 Point Judging Format
Does anybody know where I can get a look at and print a copy of the 100 point judging format? I know it is buried in the ACBS web site in the Members' Area, in the President's Manual, but when I log in and try to see them nothing happens. Apparently I need Excel to do so, but I run an Apple. I'm get...
- Mon Mar 14, 2011 10:01 am
- Forum: Odds & Ends
- Topic: Chris-Craft font?
- Replies: 9
- Views: 7359
Chris-Craft Font
Matt: Bill who? Your post seems to indicate there is something already researched and compiled, but you don't say where to look or whom to contact.
- Wed Jul 14, 2010 5:06 pm
- Forum: Engines & Powertrain
- Topic: Prop Removal
- Replies: 20
- Views: 8069
jbpratt777: I had a terrible time removing my prop the first time I tried it. The problem was that the key was sliding down the shaft until it jammed as I tried to pull the prop. The harder I pulled (even using a prop puller) the tighter it jammed. The solution took a fraction of a second to fix: I ...
- Thu Jun 17, 2010 5:52 am
- Forum: Shows, Museums, & Event Locations
- Topic: 2011 Geneva Lake Boat Show
- Replies: 5
- Views: 4240
- Mon Jun 14, 2010 2:47 pm
- Forum: Shows, Museums, & Event Locations
- Topic: 2011 Geneva Lake Boat Show
- Replies: 5
- Views: 4240
2011 Geneva Lake Boat Show
Can anyone shoot me the dates for the 2011 (that's next year) Geneva Lake Boat Show. I think it is also an international show or convention, too. I've got friends from the east coast who want to come, but I don't have my calendar at hand.
Thanks, Craig
Thanks, Craig
- Mon May 17, 2010 8:47 am
- Forum: Hardware & Rigging
- Topic: Broken Fasteners
- Replies: 15
- Views: 6988
Coincidentally, I got a new yankee screw driver just last week. Medium size, universal 1/4 inch chuck, and made in Germany by a company called Schroeder. It cost $49 with four screw bits. I ordered it off the net. My grandfather's old Stanley wouldn't reverse anymore. It was probably 70 years old. Y...
- Mon May 17, 2010 8:04 am
- Forum: Engines & Powertrain
- Topic: Missing gasket?
- Replies: 11
- Views: 6114
ANOTHER POST SCRIPT: The graphite rope I installed didn't get the job done. It was too thin. I didn't know it, but the compression nut doesn't screw tight against the bottom of the socket into which it fits. The socket in the exhaust manifold is about a half inch deeper than the compression nut is l...
- Fri May 14, 2010 3:43 pm
- Forum: Engines & Powertrain
- Topic: Missing gasket?
- Replies: 11
- Views: 6114
Missing Gasket?
Post Script Today I purchased "graphite valve packing" (AKA graphite rope) at my local True Value hardware store. I thought I was looking for an auto parts related item, but what I needed is actually found in plumbing supply. The graphite rope came in a bubble packet and measured 3/32" diameter by t...
- Sun Apr 18, 2010 10:22 pm
- Forum: Engines & Powertrain
- Topic: Missing gasket?
- Replies: 11
- Views: 6114
Bill: Yes, it is the small diameter copper pipe that runs across the top of the engine and dumps the cooling water into the exhaust system, as in the photo. The threaded compression nut on the cast iron exhaust elbow had nothing by way of a gasket (or graphite rope) under it when I took off the cool...
- Sat Apr 17, 2010 10:05 am
- Forum: Engines & Powertrain
- Topic: Missing gasket?
- Replies: 11
- Views: 6114
Missing Gasket?
Thanks, fellas. Graphite rope is now added to my list of things I need but didn't know existed. I searched auto supply web sites and was surprised to find nobody stocks graphite rope. I Googled graphite rope and eventually found I may already have a suitable material in hand: PolyTetraFluroEtheylene...
- Thu Apr 15, 2010 5:57 pm
- Forum: Engines & Powertrain
- Topic: Missing gasket?
- Replies: 11
- Views: 6114
Missing gasket?
I recently had to repair a leak in the copper pipe that delivers the cooling water into the exhaust system on my 1938 KA engine. When I removed the pipe from the engine I noticed there was no gasket or seal where the pipe enters the iron exhaust elbow. I was getting a bit of exhaust blowing into the...
- Mon Nov 09, 2009 12:03 pm
- Forum: Odds & Ends
- Topic: Does Size Matter?
- Replies: 9
- Views: 6423
Dear Moosemeat, Although your Subaru may be rated to tow 2,700 lbs, it is not suitable for safe use on the highway doing so. With only a few exceptions, I know of no automobile made in the last decade has the characteristics needed to tow a 3000 lb boat and trailer load, which is what my 17' woodie ...
- Mon Sep 07, 2009 10:26 am
- Forum: Engines & Powertrain
- Topic: Drive shaft issue
- Replies: 9
- Views: 4424
Just a few post scripts from my own experiences: 1. If the prop shaft and key won't fully seat themselves into the collar, check to see if you have a third set screw blocking the way. On some collars there is a little hole for a third set screw that locks the key tightly into place. The set screw is...
- Tue Aug 25, 2009 6:19 pm
- Forum: Engines & Powertrain
- Topic: Fuel filter in Sediment Bowl
- Replies: 0
- Views: 1604
Fuel filter in Sediment Bowl
Gentlemen, I want to install a fuel filter in the sediment bowl of my mechanical fuel pump on my 1938 KA engine. I tried to install the NAPA 3034 that seems to be cited and used by CCABC members, but it won't fit inside the glass bowl. The diameter of the filter is just a hair too large, specificall...
- Thu Aug 06, 2009 8:26 am
- Forum: Shows, Museums, & Event Locations
- Topic: Lodging Available - Hessel Boat Show
- Replies: 7
- Views: 4993
- Sun Aug 02, 2009 2:20 pm
- Forum: Engines & Powertrain
- Topic: Zenith Carbs Article
- Replies: 2
- Views: 1961
- Sun Aug 02, 2009 7:39 am
- Forum: Engines & Powertrain
- Topic: Zenith Carbs Article
- Replies: 2
- Views: 1961
Zenith Carbs Article
I recall reading what I think was a two part article on Zenith Carbs in either Classic Boating or in ACBS's Rudder magazine about a year ago. Since I'm at the lake cottage, I don't have access to my library at home.
Can anyone tell me where the article was published and the issue?
Can anyone tell me where the article was published and the issue?