Active Unanswered
Search found 15 matches
- Sun Jun 27, 2010 5:10 pm
- Forum: Odds & Ends
- Topic: Antifouling paint
- Replies: 4
- Views: 2524
Paint
I will have to check on specific paints when I get back into town, hopefully I still have the can around the shop.
- Sun Jun 27, 2010 4:57 pm
- Forum: Odds & Ends
- Topic: Antifouling paint
- Replies: 4
- Views: 2524
Paint
We put two or three coats of primer on the bottom and 5 coats of the anti-fouling paint. We scuffed each primer coat with 100 grit between coats and anti-fouling with 220 between coats.
I thought we had it down and was really surprised to see the chipping off down to primer in so many spots
I thought we had it down and was really surprised to see the chipping off down to primer in so many spots
- Fri Jun 25, 2010 3:21 am
- Forum: Odds & Ends
- Topic: Antifouling paint
- Replies: 4
- Views: 2524
Antifouling paint
Restored a 1965 17' Custom Ski. Pulled it out of the water after a month to have the seat upholstery adjusted. We are missing a lot of little spots of paint on the bottom. Primer appears to be intact. Anyone have any recommendations on paint to use?
- Tue May 25, 2010 4:58 pm
- Forum: Engines & Powertrain
- Topic: 1964 Custom Ski Throttle
- Replies: 3
- Views: 1689
- Tue May 25, 2010 9:27 am
- Forum: Engines & Powertrain
- Topic: 1964 Custom Ski Throttle
- Replies: 3
- Views: 1689
1964 Custom Ski Throttle
Put the boat in the water yesterday after 22 years of being dry. The throttle was reassembled how it appeared to be, but when driving forward we had to move the throttle pretty far to get it to catch. There are a few areas that can be adjusted. Anyone have any suggestions on settings?
- Mon Apr 05, 2010 7:16 am
- Forum: Engines & Powertrain
- Topic: Throttle Assembly
- Replies: 0
- Views: 1114
Throttle Assembly
Have a '65 CC Custom Ski, getting close to finishing a complete refurb. In moving the boat to a different shop I lost the pictures for the throttle assembly. Anyone have a diagram or pictures?
- Fri Feb 05, 2010 8:42 am
- Forum: Engines & Powertrain
- Topic: Steering Wheel
- Replies: 2
- Views: 2254
Steering Wheel
Does anyone know where I can get a new steering wheel to match the original for my 1965 17' custom ski? I believe the steering wheel is from at 1964 Galaxie. I have contacted a few car places with no luck. I have the original, but it has several cracks. Is repairing an option and what would I use? h...
- Fri Feb 05, 2010 8:33 am
- Forum: Hardware & Rigging
- Topic: Mirror
- Replies: 0
- Views: 1277
Mirror
Anyone know where to get a mirror for a 1965 CC 17
custom ski?
custom ski?
- Wed Feb 03, 2010 7:37 am
- Forum: Engines & Powertrain
- Topic: Engine Tag Paint
- Replies: 1
- Views: 1452
Engine Tag Paint
CC - 283 Chevy is 95% done on the rebuild. Need to get the engine tags repainted. Does anyone know where I might have this done?
- Wed Feb 03, 2010 7:35 am
- Forum: Engines & Powertrain
- Topic: 12' Tac Cable
- Replies: 2
- Views: 1709
- Tue Feb 02, 2010 4:15 pm
- Forum: Engines & Powertrain
- Topic: 12' Tac Cable
- Replies: 2
- Views: 1709
12' Tac Cable
Does anyone know where I can get a new 12' tac cable for my 1965 17' custom ski boat?
- Thu Jul 09, 2009 10:23 am
- Forum: Hardware & Rigging
- Topic: Steering Wheel
- Replies: 4
- Views: 3253
Steering Wheel
Hello,
I have a 1965 Chris Craft 17' Custom Ski Boat. My steering wheel is showing some age with cracks and pits. Anyone know where to have it repaired or where to locate a replacement to match original?
Thanks
I have a 1965 Chris Craft 17' Custom Ski Boat. My steering wheel is showing some age with cracks and pits. Anyone know where to have it repaired or where to locate a replacement to match original?
Thanks
- Thu Jul 09, 2009 10:21 am
- Forum: Hardware & Rigging
- Topic: Hardware for 1965 Chris Craft
- Replies: 1
- Views: 1777
Hardware for 1965 Chris Craft
Hello,
I am trying to locate a few pieces of hardware for my 1965 C-C 17' Custom Ski Boat. I am missing two scoops, a star, two trim pieces, and a few hooks. I have pictures of missing. Also, looking for a rudder & prop set.
Thank you
I am trying to locate a few pieces of hardware for my 1965 C-C 17' Custom Ski Boat. I am missing two scoops, a star, two trim pieces, and a few hooks. I have pictures of missing. Also, looking for a rudder & prop set.
Thank you
- Mon Jun 22, 2009 8:48 am
- Forum: Research Related
- Topic: Engine Housing on 1965 Custom Ski Boat
- Replies: 3
- Views: 2125
- Fri Jun 19, 2009 6:17 pm
- Forum: Research Related
- Topic: Engine Housing on 1965 Custom Ski Boat
- Replies: 3
- Views: 2125
Engine Housing on 1965 Custom Ski Boat
Working on restoring a 17' custom ski boat. The engine housing had a black material that is fairly thick and needs replaced. Anyone have an idea of what this stuff is or where I can get it?