Active Active   Unanswered Unanswered

CC Logo Position

If it doesn't pertain to metal, wood, wire or fabric—but it is about vintage Chris-Crafts, ask your question or give your advice here.

Moderators: Don Ayers, Don Vogt, Al Benton

Post Reply
Tmalko
Posts: 15
Joined: Mon Oct 08, 2018 5:31 am

CC Logo Position

Post by Tmalko » Fri Jan 01, 2021 4:38 pm

I have a 1957 CC 27’ Sedan with flying bridge. The Chris Craft logo is offset as shown in photo. Have you seen this before, before I modify it to an in line configuration? Thank you.

Tmalko
Posts: 15
Joined: Mon Oct 08, 2018 5:31 am

Re: CC Logo Position

Post by Tmalko » Fri Jan 01, 2021 5:19 pm

Chris *
Craft

Tmalko
Posts: 15
Joined: Mon Oct 08, 2018 5:31 am

Re: CC Logo Position

Post by Tmalko » Sat Jan 02, 2021 4:09 am

Image
Tmalko wrote:
Fri Jan 01, 2021 4:38 pm
I have a 1957 CC 27’ Sedan with flying bridge. The Chris Craft logo is offset as shown in photo. Have you seen this before, before I modify it to an in line configuration? Thank you.

User avatar
Captain Nemo
Posts: 691
Joined: Tue Jul 07, 2009 7:40 pm
Location: Lyons, NY

Re: CC Logo Position

Post by Captain Nemo » Sat Jan 02, 2021 9:11 am

I have not seen the logo applied other than in line. I would post a picture of my Sedan w/ Flybridge, but I think the file is too big. Not tech savvy enough to make it smaller :roll:
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.

User avatar
drrot
Posts: 1949
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Re: CC Logo Position

Post by drrot » Sat Jan 02, 2021 10:18 am

Here is the way it is in THE ESSENTIAL GUIDE [attachment=0]27sedan.jpg[/attachment]
You do not have the required permissions to view the files attached to this post.
Jim Staib
www.finewoodboats.com


1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

Tmalko
Posts: 15
Joined: Mon Oct 08, 2018 5:31 am

Re: CC Logo Position

Post by Tmalko » Sat Jan 02, 2021 12:03 pm

Thanks for your input and photos. Appreciate it. Not sure why they did it that way. Something I will be changing. I wanted to make sure I was not missing something. Yes my photo must be too big as well. I will try a reduced size and see if that works.

Tmalko
Posts: 15
Joined: Mon Oct 08, 2018 5:31 am

Re: CC Logo Position

Post by Tmalko » Sat Jan 02, 2021 12:25 pm

Photo attachment maybe.
7284F4A8-A793-44C2-A52E-ABBE1C26555D.jpeg
You do not have the required permissions to view the files attached to this post.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests