Active Unanswered
oil line fitting size
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 15
- Joined: Sat Sep 05, 2015 7:30 pm
- Contact:
oil line fitting size
Hello, Does anyone happen to know what size this fitting is? The reason I am asking is I am trying to attach an oil pressure test gauge and 1/4 npt and also 1/4 flare doesnt fit along with compression. Its the oil line tee off of an M series block. Thanks in advance
Re: oil line fitting size
You will need an original nut. Everything Chris Craft used was odd size and threads compared to anything available today. Once you have an extra nut. Any 1/4 compression ferrule and some 1/4 inch tubing will work. On the other end get the brass fittings from the hardware store that will let you adapt your gauge to the tube.
Jim Staib at Fine Wood Boats might have extras to sell.
Jim Staib at Fine Wood Boats might have extras to sell.
-
- Posts: 15
- Joined: Sat Sep 05, 2015 7:30 pm
- Contact:
Re: oil line fitting size
Thank you for the reply. It is greatly appreciated
Who is online
Users browsing this forum: No registered users and 7 guests