Active Active   Unanswered Unanswered

Motorfunding

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
SteveNL
Posts: 10
Joined: Sat Jan 28, 2017 7:33 am
Location: Netherlands (Europe)

Motorfunding

Post by SteveNL » Tue Sep 26, 2017 12:44 am

Hi guys,

As I m right, the 22ft sea skiff was sold in the past with a 95, 130 and 185 hp engine. Does anyone knows if the motorfunding fixed on the main beams is for all different engines the same? Or does a 95hp engine have a different motorfunding then a 185hp engine. The same for diameter of shaft, I have 1 inch shaft.

I want to replace my 95hp for a 100-130hp marine diesel. Does anyone have experience with this transition?

Regards,

Steve

User avatar
JimF
Club Executive Team
Posts: 611
Joined: Mon Nov 14, 2005 10:48 am
Location: Austin, TX

Re: Motorfunding

Post by JimF » Fri Sep 29, 2017 8:48 am

I believe the engine stringers would be the same no matter which engine was installed. The shaft would also be the same although there might be a difference in the propeller. I know nothing about the diesel engine but I don't see why it would not work. Do not worry about the shaft. Just align the new engine to the existing shaft and you should be good to go.
1930 Chris-Craft Model 100 20' "MOXIE"
1940 Chris-Craft Red and White 25' "Old Paint"
1946 Chris-Craft Sportsman 25' "CinCity"

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests