Active Active   Unanswered Unanswered

RUB RAIL

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

User avatar
tuobanur
Posts: 425
Joined: Wed Jul 30, 2008 1:21 pm
Location: Summerville, SC
Contact:

RUB RAIL

Post by tuobanur » Fri Feb 27, 2015 9:23 am

In the middle of putting my boat back together and hoping to have it complete for the Tavares show but have run in to a problem. One of the original rub rails for my boat (port side) has come up short and also has a very bad spot, I have been able to find some, even got a piece from Jim but the newer stuff is just a little different.
My question, do any of you have a small piece of the prewar rub rail that you can part with or know where I can find some, I can use a piece anywhere from 12" to 93" long?
Attachments
rub rail.JPG
Terry
1941 Model 101 (16') Deluxe Runabout "Miss Dot"

User avatar
mattbyrne
Posts: 213
Joined: Wed Oct 26, 2005 7:38 pm
Location: Aurora, IL
Contact:

Re: RUB RAIL

Post by mattbyrne » Fri Feb 27, 2015 10:36 am

I may be able to help you out. I got new rub rail when I restored my Gar Wood. I still have the original stuff. Let me take a look and see if the is a piece that would work for you.

User avatar
tuobanur
Posts: 425
Joined: Wed Jul 30, 2008 1:21 pm
Location: Summerville, SC
Contact:

Re: RUB RAIL

Post by tuobanur » Fri Feb 27, 2015 10:50 am

That would be great, thanks.
Terry
1941 Model 101 (16') Deluxe Runabout "Miss Dot"

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests