Active Active   Unanswered Unanswered

Hardware for 1947 Rocket

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
47rocket
Posts: 2
Joined: Fri Sep 21, 2012 1:16 pm

Hardware for 1947 Rocket

Post by 47rocket » Mon Sep 01, 2014 7:20 pm

I have a 1947 CC Rocket that does not have the two chrome rails the run down the freeboard where it meets the transom. (I'm not sure what these are called.) Could someone tell me the name for these and how I can obtain two of them?

Greg Wallace
Posts: 372
Joined: Wed Mar 08, 2006 2:49 pm
Location: Indian Lake, Ohio

Re: Hardware for 1947 Rocket

Post by Greg Wallace » Tue Sep 02, 2014 8:47 am

I'm guessing that you are referring to the vertical shiny trim pieces that cover the intersection of the topside planks and the transom planks. I call them "transom bands". if someone out there has one of these perhaps they can provide dimensions and screw location, better yet a traced pattern. I'm not sure of thickness but they were likely Stainless. A cutwater replicator would be a good choice if someone doesn't offer up a pair of originals.
Greg Wallace 23 Custom 22166 former Chris-Craft dealer Russells Point, Oh.

47rocket
Posts: 2
Joined: Fri Sep 21, 2012 1:16 pm

Re: Hardware for 1947 Rocket

Post by 47rocket » Tue Sep 02, 2014 10:44 am

Yes, thanks. That's a better description of what I'm looking for.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests