Active Unanswered
Engine ID Plate Brass Hammer Screws
Moderators: Don Ayers, Al Benton, Don Vogt
- Kerry Price
- Posts: 236
- Joined: Wed Oct 26, 2005 4:23 pm
- Location: Austin, TX
- Contact:
Engine ID Plate Brass Hammer Screws
I am trying to locate some #4 X 1/4" brass hammer screws to attach my engine ID plate onto the exhaust manifold of my MBL and can't find them anywhere. I only need 6 or so. Does anyone know where to find these?
1946 20' Custom Runabout: R-20-092
1938 19' Sportsman: 19501
http://www.chris-craft.org/registry/vie ... oat_id=532
1938 19' Sportsman: 19501
http://www.chris-craft.org/registry/vie ... oat_id=532
- Brian Robinson
- Posts: 777
- Joined: Thu Oct 27, 2005 10:49 pm
- Location: Southern California
- Contact:
Re: Engine ID Plate Brass Hammer Screws
Kerry,
I don't think they exist. Stainless steel from McMaster-Carr is all I know of
I don't think they exist. Stainless steel from McMaster-Carr is all I know of
-Brian
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009
- Don Danenberg
- Posts: 181
- Joined: Fri Nov 18, 2005 9:30 pm
- Location: Manistee, MI
- Contact:
Re: Engine ID Plate Brass Hammer Screws
Restoration Supply also carries them, but I don't know if they have brass?
- Kerry Price
- Posts: 236
- Joined: Wed Oct 26, 2005 4:23 pm
- Location: Austin, TX
- Contact:
Re: Engine ID Plate Brass Hammer Screws
Thanks, guys. Unfortunately, the only source I have found for brass is in the UK where they can be found through several sources. I went ahead and ordered some on ebay uk and having them sent to a family member there who will mail them to me. Otherwise, the shipping alone for 6 screws was going to be 40 pounds or around $70 US.
https://www.ebay.com/itm/Lister-Hammer- ... 1180345079
https://www.ebay.com/itm/Lister-Hammer- ... 1180345079
1946 20' Custom Runabout: R-20-092
1938 19' Sportsman: 19501
http://www.chris-craft.org/registry/vie ... oat_id=532
1938 19' Sportsman: 19501
http://www.chris-craft.org/registry/vie ... oat_id=532
Re: Engine ID Plate Brass Hammer Screws
Chris Craft originally used steel. So new stainless steel ones are an acceptable replacement.
Who is online
Users browsing this forum: No registered users and 6 guests