Active Active   Unanswered Unanswered

1931 Model 199 - Step Pad Fasteners

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
russ model 199
Posts: 15
Joined: Tue Dec 06, 2011 12:06 pm

1931 Model 199 - Step Pad Fasteners

Post by russ model 199 » Wed Jul 19, 2017 5:11 pm

Step Pad.JPG
I have the correct frameless black step pads from Classic Boat Connection. If anyone knows the proper fasteners to use please share. Thanks
You do not have the required permissions to view the files attached to this post.

User avatar
maritimeclassics
Posts: 606
Joined: Sat Mar 03, 2007 4:35 pm
Location: Traverse City, Mi
Contact:

Re: 1931 Model 199 - Step Pad Fasteners

Post by maritimeclassics » Thu Jul 20, 2017 8:53 am

22_3.jpg
If there was no step pad frame then it was a brass #6 round head straight slot with a brass washer. They would go inside the step pad right in the corners of the pad. In the photo it's hard to see but if you zoom in you can just make them out.
You do not have the required permissions to view the files attached to this post.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148

Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout

russ model 199
Posts: 15
Joined: Tue Dec 06, 2011 12:06 pm

Re: 1931 Model 199 - Step Pad Fasteners

Post by russ model 199 » Thu Jul 20, 2017 11:48 am

Just the information I needed. Thank you so much!

Tom Gruenauer
Posts: 217
Joined: Tue Oct 30, 2007 2:47 pm

Re: 1931 Model 199 - Step Pad Fasteners

Post by Tom Gruenauer » Mon Jul 24, 2017 8:13 am

Mike,
No plating at all?? Nickel or Chrome?
Tom

User avatar
steve bunda
Posts: 412
Joined: Thu Dec 14, 2006 5:59 pm
Location: wisconsin
Contact:

Re: 1931 Model 199 - Step Pad Fasteners

Post by steve bunda » Mon Jul 24, 2017 7:07 pm

I like the picture :D Notice very little stain on the boat as one can see planks and grain.

User avatar
maritimeclassics
Posts: 606
Joined: Sat Mar 03, 2007 4:35 pm
Location: Traverse City, Mi
Contact:

Re: 1931 Model 199 - Step Pad Fasteners

Post by maritimeclassics » Tue Jul 25, 2017 8:49 am

Brass. Steve the stain looks light because of the lighting its hard to tell in this photo. I have others of the this boat and it looks darker.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148

Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout

Tom Gruenauer
Posts: 217
Joined: Tue Oct 30, 2007 2:47 pm

Re: 1931 Model 199 - Step Pad Fasteners

Post by Tom Gruenauer » Tue Jul 25, 2017 9:57 am

Thank You!

User avatar
Brian Robinson
Posts: 777
Joined: Thu Oct 27, 2005 10:49 pm
Location: Southern California

Re: 1931 Model 199 - Step Pad Fasteners

Post by Brian Robinson » Tue Jul 25, 2017 11:41 am

Later in the 30s they went to nickel escutcheon pins when no chrome frame on utilities and such.
-Brian
1923 Hackercraft 23' Dolphin #03
1938 Gar Wood 22' Streamliner #6256 Empress
1952 Chris~Craft 19' Racing Runabout #363 Thunderstruck
Robinson Restoration, LLC (760) 468-1009

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest