Active Unanswered
KL Engine Running Hot
Moderators: Don Ayers, Al Benton, Don Vogt
KL Engine Running Hot
Manifold output running hotter on port side KL engine. Besides a possible water pump issue what other causes are possible and how would you isolate it?
Re: KL Engine Running Hot
You mention the port engine is running warm. How warm? Is there a noticeable difference in water output when they both run at idle?
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
- Captain Nemo
- Posts: 730
- Joined: Tue Jul 07, 2009 7:40 pm
- Location: Lyons, NY
- Contact:
Re: KL Engine Running Hot
It could also have some mud and rust blocking the water jacket too. It’s best to remove the manifold and take of the cap and exhaust elbow off, run a coat hanger thru and flush with water.
I would start with the water pump first. If it has a rubber impeller, it could be worn or missing some vanes.
I would start with the water pump first. If it has a rubber impeller, it could be worn or missing some vanes.
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.
Re: KL Engine Running Hot
Thanks for the responses. The temperature increases at a higher RPM and I saw about a 50 degree difference. The water pumps are the Sherwood type that you have to grease with the metal gear impeller. I’ve heard they are not efficient. That was my first suspect. I Like the coat hangar idea. Appreciate your time.
-
- Posts: 2092
- Joined: Thu Dec 29, 2005 10:41 pm
- Location: Powhatan Courthouse Virginia
- Contact:
Re: KL Engine Running Hot
start with the pump....don't pull the manifold if you don't have to...
John in Va
John in Va
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)
Re: KL Engine Running Hot
Thanks John!
Re: KL Engine Running Hot
I'd start with a temp gun to make sure the gauges are accurate. Handy in the kitchen when this project is over. If they are accurate swap the water pumps. Remember that the inlet/outlet change with engine rotation.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: KL Engine Running Hot
Second on the infrared temperature gun. Can also be used to pinpoint hot spots on the manifold or head.
1966 Lyman Cruisette 25 foot "Serenity Now!"
1953 Chris Craft Sportsman 22 foot "Summerwind"
1953 Chris Craft Sportsman 22 foot "Summerwind"
-
- Posts: 2092
- Joined: Thu Dec 29, 2005 10:41 pm
- Location: Powhatan Courthouse Virginia
- Contact:
Re: KL Engine Running Hot
oh yes...heat gun FIRST ... no question about it
John in Va.
John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)
Re: KL Engine Running Hot
Excellent. Thank you!
Who is online
Users browsing this forum: No registered users and 12 guests