Active Active   Unanswered Unanswered

Peacocks for engine block water drainage

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

eefischer1
Posts: 5
Joined: Tue Jun 25, 2019 3:43 am
Contact:

Peacocks for engine block water drainage

Post by eefischer1 » Mon Jul 01, 2019 8:11 am

Does anyone have a schematic drawing, picture, or accurate description of the locations of the stopcock/petcocks for drainage of water from a ChrisCraft 327 engine block. I believe there are 6 of these brass stopcock.

jim g
Posts: 1003
Joined: Wed Dec 14, 2011 10:55 pm
Contact:

Re: Peacocks for engine block water drainage

Post by jim g » Wed Jul 03, 2019 7:49 am

For the F series?

eefischer1
Posts: 5
Joined: Tue Jun 25, 2019 3:43 am
Contact:

Re: Peacocks for engine block water drainage

Post by eefischer1 » Thu Jul 18, 2019 2:56 am

Yes, a 327 F

jim g
Posts: 1003
Joined: Wed Dec 14, 2011 10:55 pm
Contact:

Re: Peacocks for engine block water drainage

Post by jim g » Sat Jul 20, 2019 3:09 pm

One on each side of the block above oil pan about middle on engine.
One at the back of each exhaust manifold
One underneath each exhaust riser
One on the bottom of the copper pipe from the water pump to trans oil cooler
One underneath the water pump
One underneath the water circulating pump
One at the bottom of the trans oil cooler

I think thats all of them. 10 total

eefischer1
Posts: 5
Joined: Tue Jun 25, 2019 3:43 am
Contact:

Re: Peacocks for engine block water drainage

Post by eefischer1 » Mon Jul 29, 2019 7:58 pm

Thank you

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests