Active Active   Unanswered Unanswered

windshield parts

This is a focused discussion area for information unique to Chris-Craft's Cavalier Division.

Moderators: Don Vogt, Al Benton, Don Ayers

Post Reply
seastrake
Posts: 28
Joined: Thu May 28, 2015 5:50 pm

windshield parts

Post by seastrake » Fri May 29, 2015 1:08 pm

Me and my son purchased a 1967 33' cavalier seastrake, looking for port side windshield lever and lock.

User avatar
Doug P
Posts: 1036
Joined: Thu Jul 24, 2008 4:24 pm
Location: Pacific NorthWest

Re: windshield parts

Post by Doug P » Fri May 29, 2015 3:37 pm

On ebay continuously

jfrprops
Posts: 2062
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia

Re: windshield parts

Post by jfrprops » Fri May 29, 2015 8:59 pm

I have the exact same boat, 66 model....I can help you with most anything since I have done most everything?
sadly...I don't have those windshield parts but like previous poster said....on ebay frequently.

contact me direct if you need anything advice wise.

you have a great, strong, revolutionary boat......

John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

User avatar
Doug P
Posts: 1036
Joined: Thu Jul 24, 2008 4:24 pm
Location: Pacific NorthWest

Re: windshield parts

Post by Doug P » Fri May 29, 2015 11:26 pm

Roamer Semi Enclosed Cruiser.pdf
Roamer Semi Enclosed Cruiser.pdf
Am trying to square both port and stbd window screens. Over the last few years I have tried weights on concrete floors, cedar wedges. The wood and glass are all original.

IDEAS WILL BE APPRECIATED AND BOAT NAMED AFTER YOU.


I WILL NOT CALL IT THE BOY TROY
You do not have the required permissions to view the files attached to this post.

seastrake
Posts: 28
Joined: Thu May 28, 2015 5:50 pm

Re: windshield parts

Post by seastrake » Sat May 30, 2015 12:14 am

Thanks John, will keep in contact

User avatar
ballardMike
Posts: 16
Joined: Sat Jan 26, 2013 3:07 pm
Location: seattle

Re: windshield parts

Post by ballardMike » Sat Aug 15, 2015 12:02 pm

We have a '67 Futura 33'... all same but for hull. A problem we have is corroded hinge at top of port window... frame opens a bit only because the top has some bend. Cracked the glass trying to go past that bend. =\

You guys had that problem w/ hinges? ..and do you know of a good remedy other than complete rebuild?
'67 Cavalier Futura 33'

jfrprops
Posts: 2062
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia

Re: windshield parts

Post by jfrprops » Sat Aug 15, 2015 1:54 pm

Have not had THAT problem...but had most others......shame it broke.

Need to run a line of duct tape, like a gutter, under the joint in the hinge and saturate the hinge joint with PB blaster....

I am sorry I don't have that part from cavs I have cut up for parts....

John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest