Active Active   Unanswered Unanswered

1950 Sportsman Deck Seams

Framing, planking and fairing. Repair, or reconstruction. If it's hull related, you'll find it here.

Moderators: Don Vogt, Al Benton, Don Ayers

Post Reply
cewplatt
Posts: 20
Joined: Sun Oct 18, 2009 8:44 pm

1950 Sportsman Deck Seams

Post by cewplatt » Sat Feb 19, 2011 1:15 am

Greetings,

I'm putting a new finish on my 1950 U-22. The false deck seams are a bit shallow to hold sealant after fairing and sanding. The deck is in nice shape and doesn't need to be replaced except for one cracked plank. Any tips on reworking the seams in place? I was thinking of getting a small router (maybe a dremel with attachment) or just use a sharp blade, straight edge and chisel. Can anyone confirm the original width and depth for the seams? It's hard to judge with the years of use with paint on top of the caulk. Thanks in advance for any advice.

Thanks,
Clay Platt
1950 U-22 Sea Dragon

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests