Active Unanswered
Vapor barrier under berths
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 61
- Joined: Sat Jun 27, 2009 9:16 pm
- Contact:
Vapor barrier under berths
Mildew is a constant battle on a boat, especially an old one like mine. I'm thinking about putting a plastic vapor barrier underneath each berth to keep the moisture from the bilge away from the mattresses and the drawers underneath the bunks. Can anyone think of why this wouldn't be a good idea? I don't want to do it if it's going to cause other unforeseen problems.
Re: Vapor barrier under berths
Since no one else offered up thoughts, I'll do so, with the caveat that I've never owned a boat with a cabin/berths. Putting a vapor barrier like plastic anywhere is providing a spot for moisture to condense to liquid water when temperatures differ between sides of the barrier. I propose this would be the situation with a cabin on one side of the barrier and bilge on the other. So I would ask myself where that newly formed liquid water will end up after it condenses on the plastic. Cushions or wood would be bad, leading to more mildew , mold, and rot. My solution would be to enhance air circulation through the cabin/berth area and bilge to remove stagnant damp air as a way to reduce mildew formation. When not in use, position cushions to maximize airflow through and around them, open cabinet doors, locker areas, etc.
1960 18' Continental
1970 Boston Whaler Sakonnet w/ Bearcat 55 outboard
1970 Boston Whaler Sakonnet w/ Bearcat 55 outboard
Re: Vapor barrier under berths
I also think a vapor barrier is going to cause more problems than it will solve in the long run.
In the south people run their air conditioner to reduce moisture in their cruisers. Living in the north and being on a mooring where I am not hooked up to electricity I use DampRid products. I have had the best luck with the smaller refillable canisters.
In the south people run their air conditioner to reduce moisture in their cruisers. Living in the north and being on a mooring where I am not hooked up to electricity I use DampRid products. I have had the best luck with the smaller refillable canisters.
Troy in ANE - Former President CCABC
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
-
- Posts: 61
- Joined: Sat Jun 27, 2009 9:16 pm
- Contact:
Re: Vapor barrier under berths
Thanks. I opted not to do the vapor barrier and got the AC fixed. Much more comfortable and a lot less humidity.
-
- Posts: 1
- Joined: Thu Apr 20, 2023 10:33 am
- Contact:
Re: Vapor barrier under berths
I bought a 57' Constellation this year. The previous owners put bilge blowers beneath the berths. I recently added outlets under the berths with smart plugs, so now I don't have cords coming out of the under-bed drawers, plus I can control the blowers remotely. I currently have them programmed to start at sunrise and turn off at sunset. Same with the bilge blower in my engine room. I'm down in south Texas, so I also put a dehumidifier in the salon. Anything to try to keep the humidity down to avoid mold and mildew.
Who is online
Users browsing this forum: No registered users and 3 guests