Active Active   Unanswered Unanswered

lancer emblems

Bronze, stainless, chrome or steel. If you need information about the hardware on your classic fiberglass Chris-Craft, pose your questions here.

Moderators: Don Ayers, Don Vogt, Al Benton

Post Reply
Posts: 9
Joined: Mon Jul 21, 2008 1:56 am

lancer emblems

Post by dplazesk » Sat Jan 10, 2009 7:16 am

I want to replace the corroded emblems on my 1972 23' lancer. I currently have have the chris craft with out the star and was wondering if they came that way or with the lancer emblem in between. Also my boat is shrink wrapped does anyone know the dimmensions on the original logo. Thanks.

User avatar
Posts: 1875
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI

Post by drrot » Sun Jan 11, 2009 6:21 am

The emblems come in 9, 15 and 26" measured overall when installed (roughly). Here are some 26" emblem

Posts: 7
Joined: Tue Jun 20, 2006 3:31 pm

Post by Thomas_CCL23 » Wed Mar 11, 2009 8:20 am

The Chris Craft emblem on your boat seems to be of the correct 26" kind. As you have a model with a rubrail on the side making it an early 70's model the star ought to be replaced by the Lancer emblem. In 1969 there was only a Lancer emblem on the hullsides (no CC logo)and on later boats, from -74 or 75 the star returned and the Lancer emblem moved forward, below the windscreen (still on the hullside).


Wood Commander
Posts: 885
Joined: Wed Oct 26, 2005 11:48 pm
Location: Seattle area

Post by Wood Commander » Wed Mar 11, 2009 9:47 am

Ditto on the Lancer emblems versus the stars.
Here's a scan of an emblem decal I had a boat name shop make for my 19'er to replace the badly beat up original plastic emblems.


1953 35' Commander "Adonis III"

1970 23' lancer project

Posts: 7
Joined: Tue Jun 20, 2006 3:31 pm

Post by Thomas_CCL23 » Wed Mar 11, 2009 1:43 pm

Had this approx 6" high Lancer emblem made in NCC milled brass and then chromed & Painted. It cannot be made larger as it then will not match the gently curved hullsides of the Lancers. So no replacement for the plastic ones. A small series of these were made but not any left.


Posts: 7
Joined: Wed Jan 12, 2011 8:09 pm
Location: cherrh hill N.J.

chris craft logo ( side of hull )

Post by chriscraftdory » Sat Feb 12, 2011 3:34 pm

Is this available ?



User avatar
Don Ayers
Club Executive Team
Posts: 1681
Joined: Tue Oct 25, 2005 3:05 pm
Location: Oklahoma

Post by Don Ayers » Sun Feb 13, 2011 8:19 am

If someone can get me an original plastic one I can get them made.

Don Ayers
1959 Riva Ariston

User avatar
Posts: 59
Joined: Fri Aug 06, 2010 8:24 pm

Post by craigjudge » Mon Apr 18, 2011 10:13 am

Not sure about the plastic. my 75 has metal emblems. I'm also not sure about the blue and red inserts. Most I've seen are black.Mine are in pretty good shape so I'm freshening them up. Here's a before/after. If your boat is a 70-73 you're missing this emblem between the Chris Craft script. I might be able to dig up a pair but they'll need restoring.


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest