

Lifting rings for 23 Lancer/Commander
Moderators: Don Ayers, Al Benton, Don Vogt
- island time
- Posts: 131
- Joined: Mon Sep 28, 2015 9:11 pm
Lifting rings for 23 Lancer/Commander
Hi all, I'm working on my current project-A 1968 23 Commander and want to add the original lifting eyes/rings.
Is there anyone out there that has a set they would be willing to part with?
Craig Wilson
Is there anyone out there that has a set they would be willing to part with?
Craig Wilson
Re: Lifting rings for 23 Lancer/Commander
Post a photo with thread size.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
- island time
- Posts: 131
- Joined: Mon Sep 28, 2015 9:11 pm
Re: Lifting rings for 23 Lancer/Commander
Thanks for the reply Jim,
I don't have any hardware yet. The boat was never equipped with lifting rings I just want to add them. I'm not sure if they were even offered on these boats but I thought I would start asking around.
Craig Wilson
I don't have any hardware yet. The boat was never equipped with lifting rings I just want to add them. I'm not sure if they were even offered on these boats but I thought I would start asking around.
Craig Wilson
Craig Wilson
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Re: Lifting rings for 23 Lancer/Commander
I would figure out a secure way to attach them to the boat first. Wood boats that length usually had 3/4" lift rods.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: Lifting rings for 23 Lancer/Commander
I just replaced the originals on our 1969 Cavalier Ski boat. I still have the originals if you aren't worried about being top quality... One is a little bent but otherwise a good polish would clean them up.
I bought a set from classic boat connection and then drilled and tapped for the larger threaded rod.
I would definitely suggest you figure out how you are going to install them securely as you will probably need to buy, or fabricate, the Chris Craft bracketry that ties them into the keel and stringers.
I bought a set from classic boat connection and then drilled and tapped for the larger threaded rod.
I would definitely suggest you figure out how you are going to install them securely as you will probably need to buy, or fabricate, the Chris Craft bracketry that ties them into the keel and stringers.
Brian Flaherty
1969 Chris-Craft Cavalier 17 Ski Boat "TUPPERWARE"
"You'll never discover great lands, with your feet planted in the sand"
1969 Chris-Craft Cavalier 17 Ski Boat "TUPPERWARE"
"You'll never discover great lands, with your feet planted in the sand"
- island time
- Posts: 131
- Joined: Mon Sep 28, 2015 9:11 pm
Re: Lifting rings for 23 Lancer/Commander
You hit the nail on the head Brian, I guess I should have been more specific. I'm looking for the original Chris Craft bracketry. I have a spare set of rings and rod is easy to come by but the brackets I'm sure are unique to certain boats.
Craig Wilson
Craig Wilson
Craig Wilson
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Re: Lifting rings for 23 Lancer/Commander
They were offered as an option in the price list for the 1973 models. I don't know if they were offered for the earlier boats. But the basic hull never change during the run.
-
- Posts: 400
- Joined: Wed Mar 08, 2006 2:49 pm
- Location: Indian Lake, Ohio
Re: Lifting rings for 23 Lancer/Commander
Can't say for sure if factory available but we never had lift rings on Lancers. By that time few glass boats had traditional style deck lift rings. We installed a lot of them though. There were and likely still are components available for the bow set up. If not already there, a heavy duty dual shank stainless bow eye (like would be used for towing or trailer winching) will need to be installed. On the inside a bracket assy will be secured by the eye shanks that will support a threaded rod that will attach to a deck lift ring.
On the stern we would fabricate an "L" bracket (heavy material with gussets) that can be secured to the "meaty" part of the transom to support the shaft and deck ring. We also attached to other secure points as the circumstances required. Perhaps the best way is to check out a modern ski boat that still installs factory lift rings.
We also installed stern eyes and made "v" straps for lifting. Same for bow.
As I recall, chris craft didn't install eyes suitable for lifting in transom either.
On the stern we would fabricate an "L" bracket (heavy material with gussets) that can be secured to the "meaty" part of the transom to support the shaft and deck ring. We also attached to other secure points as the circumstances required. Perhaps the best way is to check out a modern ski boat that still installs factory lift rings.
We also installed stern eyes and made "v" straps for lifting. Same for bow.
As I recall, chris craft didn't install eyes suitable for lifting in transom either.
Greg Wallace 23 Custom 22166 former Chris-Craft dealer Russells Point, Oh.
- island time
- Posts: 131
- Joined: Mon Sep 28, 2015 9:11 pm
Re: Lifting rings for 23 Lancer/Commander
Thanks Greg,
I appreciate your input into this idea.
I guess if they were not a regular thing i probably would not try to install them, I don't need them except for working under the boat or if I wanted to take the boat off the trailer. I know I could design brackets that would work but I really want the boat as original as possible so I will leave well enough alone and stop looking for more things to spend time and money on.
Craig Wilson
I appreciate your input into this idea.
I guess if they were not a regular thing i probably would not try to install them, I don't need them except for working under the boat or if I wanted to take the boat off the trailer. I know I could design brackets that would work but I really want the boat as original as possible so I will leave well enough alone and stop looking for more things to spend time and money on.

Craig Wilson
Craig Wilson
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Churchville, NY
Alexandria Bay, NY
1968 23' Chris Craft lancer
1971 31' Revelcraft
1988 25' Fourwinns
1972 19' Chris Craft Lancer
1957 18' Chris Craft Sea Skiff
1958 18' Chris Craft Sea Skiff
1968 23' Chris Craft Commander
Re: Lifting rings for 23 Lancer/Commander
According to the 1968 Corsair brochure, lifting rings were an option on Lancer 23's. My '68 Lancer 23' came with lifting rings, which, according to the hull card, were installed at the factory.
"Hen's Teeth"
1971 Lancer 23' Offshore
1971 Lancer 23' Offshore
Who is online
Users browsing this forum: No registered users and 1 guest