Active Unanswered
Search found 40 matches
- Thu May 23, 2013 6:43 pm
- Forum: Finishing
- Topic: Deckmast Varnish or Paint ?
- Replies: 6
- Views: 2769
Re: Deckmast Varnish or Paint ?
You think with rechroming they can mask the 1mm pits ?
- Thu May 23, 2013 3:11 pm
- Forum: Finishing
- Topic: Deckmast Varnish or Paint ?
- Replies: 6
- Views: 2769
Re: Deckmast Varnish or Paint ?
Thanks, i did check and found lots of primer work. So my goal is to sand it smooth and apply with new shiny white top. Question on the Toplight casing, this has significant pitting damage from corrosion. there is a p/n stamped saying 04-44-18268. It is a combined Anchor and Toplight unit in two shel...
- Wed May 22, 2013 1:27 pm
- Forum: Finishing
- Topic: Deckmast Varnish or Paint ?
- Replies: 6
- Views: 2769
Deckmast Varnish or Paint ?
Hello fellow Boaters,
A quick question; Is the deckmast as shown on my Cavalier standard varnished or did it come white painted ? I want to varnish it and take of the paint but im not sure if it is wood or Aluminium and what looks better ?
Thanks for your advise !
regards Robert
A quick question; Is the deckmast as shown on my Cavalier standard varnished or did it come white painted ? I want to varnish it and take of the paint but im not sure if it is wood or Aluminium and what looks better ?
Thanks for your advise !
regards Robert
- Wed Apr 03, 2013 6:54 am
- Forum: Engines & Powertrain
- Topic: Dimension/Drawing Enginebay 30' Cavaliers
- Replies: 1
- Views: 1100
Dimension/Drawing Enginebay 30' Cavaliers
Gentlemen, I am thinking to swap my 2 old engines to Detroit Diesel 638`s. I will be making new engine mounts and calculating heat dissipation/radiation and air flow for these new engines, to do this correct i would like to have a technical drawing or sketch of the engine bay with dimensions. Are th...
- Tue Mar 12, 2013 8:23 am
- Forum: Engines & Powertrain
- Topic: Popping shaft bearing
- Replies: 11
- Views: 3892
I pulled the boat and took out the shaft and bearing. After looking at the shaft on the floor, i rolled it over the concrete with my foot. I noticed the end was spooning a bit. So i have a little bend prop shaft which causes troubles i think. So i am sourching a machine shop to make me a new one. Un...
- Wed Feb 27, 2013 4:05 am
- Forum: Engines & Powertrain
- Topic: Popping shaft bearing
- Replies: 11
- Views: 3892
Thanks Joan, actually i completely changed the drive train already. New mass ring (heavier) on flywheel with 5 fase damper plate. I wanted a slightly more heavy flywheel for better efficiency at lower speeds. Then i did a full revision on the Paragon P31. Reinstalled everything, aligned shaft which ...
- Tue Feb 26, 2013 5:45 pm
- Forum: Engines & Powertrain
- Topic: Popping shaft bearing
- Replies: 11
- Views: 3892
- Tue Feb 26, 2013 10:01 am
- Forum: Engines & Powertrain
- Topic: Popping shaft bearing
- Replies: 11
- Views: 3892
- Tue Feb 26, 2013 9:46 am
- Forum: Cockpit and Cabin Interiors
- Topic: 1963 Constellation flooring
- Replies: 29
- Views: 14776
- Tue Feb 26, 2013 4:47 am
- Forum: Engines & Powertrain
- Topic: Popping shaft bearing
- Replies: 11
- Views: 3892
Popping shaft bearing
I have been trying to locate a strange vibration with noise in the engine train. Changed damper plate and shockmounts. Still in stationairy forward or reverse a fast bonking sound comes from somewhere. I suspect that the prop shaft bearing outside is done. Does any1 have the dimensions for a 1" shaf...
- Mon Aug 13, 2012 2:59 am
- Forum: Chris-Craft Antique Boat Club Business
- Topic: Fall 2011 Brass Bell
- Replies: 41
- Views: 17978
- Tue Jul 24, 2012 1:24 am
- Forum: Engines & Powertrain
- Topic: P31 Paragon rattling @idle
- Replies: 4
- Views: 2353
- Mon Jul 23, 2012 4:11 am
- Forum: Engines & Powertrain
- Topic: P31 Paragon rattling @idle
- Replies: 4
- Views: 2353
P31 Paragon rattling @idle
Hello Boaters, My starboard P31 rattles in idle and idle forward/reverse. It needs revs to comfort itself. The whole boat is shaking and resonating. It also looks like oil is comming from the output shaft creating lines of oil on the bilge which is black oil, after a trip when i check the oil level ...
- Thu Jul 19, 2012 9:56 am
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105
unfortunate reply from the museum; It appears to be a Constellation or perhaps a Catalina, but the hull number does not make sense. �789_� is much too high a number. Even �789� is too high. What is the length of your boat? Do you have the original engines installed? If so, we might be able to resear...
- Thu Jul 12, 2012 2:36 am
- Forum: Chris-Craft Antique Boat Club Business
- Topic: Fall 2011 Brass Bell
- Replies: 41
- Views: 17978
- Wed Jul 04, 2012 6:23 am
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105
Hi Jim, Thanks for asking and sorry for the late reply. Lately i became father of a Beautifull daughter named Kirsten. Its my second daughter,and her name is Elina. I still had to give my Cavalier a name it will be "Kirina" as a result from both names of my daughters. Last few weeks i`ve been very b...
- Mon Jun 18, 2012 4:53 pm
- Forum: Hull Construction
- Topic: Coating damage on Hull forefoot , Cavalier 33'
- Replies: 1
- Views: 2005
- Sat Jun 16, 2012 4:43 pm
- Forum: Hardware & Rigging
- Topic: Rudder shaft sealing principle on a Cavalier 33
- Replies: 9
- Views: 5317
Thanks Phil! That made me certainppeters48 wrote:Here is a link that might help
http://www.pbase.com/mainecruising/stuffing_box&page=3
Good Luck
Phil
- Thu Jun 14, 2012 10:10 am
- Forum: Hull Construction
- Topic: Coating damage on Hull forefoot , Cavalier 33'
- Replies: 1
- Views: 2005
Coating damage on Hull forefoot , Cavalier 33'
Hi, Due to some small maintenance on my recent bought Cavalier i docked it and noticed the epoxy or some kind of coat applied is damaged to the wood. see picture; http://s17.postimage.org/xq5u4op1n/IMG_20120613_194750.jpg http://s7.postimage.org/sldv1rawn/IMG_20120613_194804.jpg It seems previous ow...
- Thu Jun 14, 2012 10:02 am
- Forum: Hardware & Rigging
- Topic: Rudder shaft sealing principle on a Cavalier 33
- Replies: 9
- Views: 5317
Hi Tom, Thanks for answering, im not looking to replace these, im just curious if i should replace the cords as i have no clue how long they have been inside. But as said im not sure if there is a cord inside, looks solid with a waxed substance.... So im game to put a screw driver in them to see if ...
- Thu Jun 14, 2012 2:21 am
- Forum: Hardware & Rigging
- Topic: Rudder shaft sealing principle on a Cavalier 33
- Replies: 9
- Views: 5317
- Thu Jun 14, 2012 2:20 am
- Forum: Cockpit and Cabin Interiors
- Topic: Top Side Windows Cavalier 33`
- Replies: 4
- Views: 3038
- Tue Jun 12, 2012 5:10 pm
- Forum: Hardware & Rigging
- Topic: Rudder shaft sealing principle on a Cavalier 33
- Replies: 9
- Views: 5317
Rudder shaft sealing principle on a Cavalier 33
Hello fellow boaters, Today i took out the starboard rudderblade with shaft for maintenance (its bended)And i noticed the sealing system. What i know is a system that works with grease cord which you lay in circles inside the seal nut. The nut on my CC (see picture) has as it looks a layer of some s...
- Mon Jun 11, 2012 8:06 am
- Forum: Cockpit and Cabin Interiors
- Topic: Top Side Windows Cavalier 33`
- Replies: 4
- Views: 3038
Re: Side Shields
Hence my questionevansjw44 wrote:Looks to me like the hard top and side shields are not stock. Some of these had hard tops but they didn't look like yours. I've never seen hard sides like yours. Most had soft side curtains and lot had sort tops.
- Mon Jun 11, 2012 7:13 am
- Forum: Cockpit and Cabin Interiors
- Topic: Top Side Windows Cavalier 33`
- Replies: 4
- Views: 3038
Top Side Windows Cavalier 33`
I am restoring my Cavalier to original looks. Therefore i am on the search for the port and Sb side shields that 45degree. The rectengular windows must go! http://s18.postimage.org/qzcwoh2lh/P6100042.jpg Perhaps an adress or phone nr. from a scrap yard? Or if somebody has the original construction d...
- Fri Jun 08, 2012 6:15 pm
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105
- Fri Jun 08, 2012 4:59 pm
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105
Thanks for your reply and dito investigations, however another issue is that the original engines have been replaced in 1994 by 2x Peugeot Diesel engines. The previous owner before passed away during the restauration process. The insurreance legal form mentions Constellation 30' :? The boat is in Eu...
- Thu Jun 07, 2012 3:47 pm
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105
- Thu Jun 07, 2012 9:38 am
- Forum: Cavalier Division Enthusiast Group
- Topic: Parting out
- Replies: 13
- Views: 17658
- Thu Jun 07, 2012 3:18 am
- Forum: How to Use Boat Buzz
- Topic: Bought a Chris Craft ! but which type ? pls help..
- Replies: 35
- Views: 20105