Active Active   Unanswered Unanswered

Search found 30 matches

by stefan
Mon Jan 17, 2022 10:50 pm
Forum: Hardware & Rigging
Topic: Steering cable
Replies: 0
Views: 3849

Steering cable

What fitting do I need to connect my replacement Teleflex M66 cable at the rudder end on my '66 Cavalier Dory
by stefan
Mon Jan 17, 2022 10:32 pm
Forum: Hardware & Rigging
Topic: Steering cable
Replies: 0
Views: 3491

Steering cable

What fitting do I need to connect my replacement Teleflex M66 cable at the rudder end on my '66 Cavalier Dory
by stefan
Mon Mar 01, 2021 7:47 am
Forum: Electrical Systems
Topic: Best Battery?
Replies: 2
Views: 4139

Re: Best Battery?

Thanks B. Rat.
by stefan
Sun Feb 28, 2021 8:09 am
Forum: Electrical Systems
Topic: Best Battery?
Replies: 2
Views: 4139

Best Battery?

Restoring a "66 Cavalier Dory (283 V-8)...What is my best choice for a battery? someone suggested very high cold cranking amps
by stefan
Fri Feb 26, 2021 7:42 am
Forum: Odds & Ends
Topic: Swim/boarding ladder
Replies: 11
Views: 7828

Re: Swim/boarding ladder

Matt Smith wrote:
Mon Nov 09, 2020 8:28 am
The one at Freedom is amazing and the right one to have. It can be stowed away and all thought through. Also anything off the transom has to be screwed into the boat, and your feet are near the prop, which is insane dangerous. YA NEVER KNOW.
WHERE DO I BUY ONE? Stefan
by stefan
Thu Feb 18, 2021 3:31 pm
Forum: Hull Construction
Topic: 1966 22' Cutless Dory project
Replies: 3
Views: 7969

Re: 1966 22' Cutless Dory project

I am back into action after a long delay...working on the Dory...Do you still own yours?
by stefan
Thu Feb 18, 2021 3:24 pm
Forum: Odds & Ends
Topic: instruments
Replies: 4
Views: 6457

Re: instruments

Been a long lay-0ff...back at it with the Dory...Got the right gauges from Dale before he retired. thanks.
by stefan
Wed Mar 02, 2016 10:59 am
Forum: Finishing
Topic: varnish polishing
Replies: 5
Views: 2861

varnish polishing

Trying to finish off varnish rail around perimeter of hull. Will use 1200,1500 sandpaper, several maguire's products and buffer. How do I attack trim pieces, rounded edges of boards and corner areas where buffer can't reach?
by stefan
Wed Mar 02, 2016 10:22 am
Forum: How to Use Boat Buzz
Topic: registration number style
Replies: 4
Views: 2990

Re: registration number style

I am (re-) new to this...where do I find the thread to which you refer? Thanks, Stefan
by stefan
Tue Mar 01, 2016 3:36 pm
Forum: How to Use Boat Buzz
Topic: registration number style
Replies: 4
Views: 2990

registration number style

I am restoring a 1966 Cavalier Dory...almost entirely original..gauges, fittings, etc. Rebuilt center console from museum drawings. I want to be as authentic as possible. Is there a registration number style that was used on Cadillac, MI hulls from 1966. pictures?
by stefan
Sun Jul 03, 2011 9:10 am
Forum: Odds & Ends
Topic: sound reduction
Replies: 4
Views: 2700

sound reduction

Someone told me there is an absolute best material to put on the inside surface of the 'dog house' to reduce engine noise in the boat. Something like 'soundstop' but it has lead? in it ? What should I use for my '66 cavaliet Dory? Thanks, Stefan
by stefan
Thu Apr 21, 2011 6:55 am
Forum: Finishing
Topic: varnish polishing
Replies: 14
Views: 6653

varnish polishing

I'm having trouble getting my last coat on my '66 Cavalier Dory varnished areas to be dust and/or spec free. Don't know if there is just too much ambient dust, dust in the foam roller or what but people are saying I should just polish the varnished areas and be done with it. I may do this but I love...
by stefan
Thu Apr 21, 2011 6:49 am
Forum: Hardware & Rigging
Topic: solid back trim
Replies: 7
Views: 3715

Well...I ended up purchasing 3/8" solid back brass and will have it chrome plated. Thanks, Stefan
by stefan
Thu Mar 10, 2011 9:28 am
Forum: Cockpit and Cabin Interiors
Topic: fasteners for vinyl flooring
Replies: 0
Views: 1391

fasteners for vinyl flooring

I remade all the floor sections for my '66 Cavalier Dory and wrapped them with Deco Dot vinyl. I will screw them onto the floor supports. Have stainless Sharx Flat head phillips but would like to know if there is a finishing washer out there that won't have a sharp edge and cut into the new vinyl. I...
by stefan
Thu Mar 10, 2011 9:01 am
Forum: Hardware & Rigging
Topic: solid back trim
Replies: 7
Views: 3715

solid back trim

I built a center console for a '66 Cavalier Dory. I MUST find 3/8" solid back trim (stainless ?) (aluminum ?) TACO in Jameston Distributers sells solid back (stainless) but only in 1' width. Any ideas? Thanks, Stefan Schmidt; 'Jadori'
by stefan
Wed Mar 25, 2009 4:33 pm
Forum: Hardware & Rigging
Topic: '66 Cavalier Dory steering wheel
Replies: 0
Views: 1556

'66 Cavalier Dory steering wheel

I purchased this 22' Dory from a fellow who switched the original steering wheel to a cooler external spoke type but I am having trouble with clearance over the instrument panel box on top of the dash. I can make it work but I am trying to restore this boat to as close to original as possible. Anyon...
by stefan
Mon Mar 02, 2009 1:16 pm
Forum: Hull Construction
Topic: Glueing
Replies: 3
Views: 2421

Glueing

I am building a center console out of marine mahogony plywood for a 22' Cavalier Dory. We are making a practice one out of birch to see if our design is correct and to learn a little concerning joining it all together. My question is about what glue to use. A fellow suggested 'gel' glue which does n...
by stefan
Fri Feb 27, 2009 10:25 am
Forum: Finishing
Topic: Varnish quality ?
Replies: 2
Views: 2812

Thanks Tom. I will use the Captain's. The pictures are helpful. stefan
by stefan
Fri Feb 27, 2009 10:10 am
Forum: Odds & Ends
Topic: '66 Cavalier Dory weight with trailer
Replies: 2
Views: 2313

Thanks for the weight info. Trailer didn't come with any title or registration but I would assume it would be under 1000 lbs. stefan
by stefan
Thu Feb 26, 2009 3:22 pm
Forum: Finishing
Topic: Varnish quality ?
Replies: 2
Views: 2812

Varnish quality ?

I am staining and varnishing from scratch the transom, a new center console and the the bow deck bulkhead on my '66 Dory but many of the mahogony items on my boat have already been coated several times so I will just add several coats to those areas. My question is about the varnish. The work that h...
by stefan
Thu Feb 26, 2009 2:59 pm
Forum: Odds & Ends
Topic: '66 Cavalier Dory weight with trailer
Replies: 2
Views: 2313

'66 Cavalier Dory weight with trailer

I just bought a nice used all wheel drive SUV with a V8 to hopefully haul & launch my boat in early summer. How much do you guys think my boat weighs with the double axel trailer. The 22' dory has the V8 283 engine. I'm also wondering what type of hitch to attach to my vehicle. Thanks, Stefan in Mad...
by stefan
Wed Apr 16, 2008 11:15 pm
Forum: Finishing
Topic: paint polishing
Replies: 2
Views: 2783

paint polishing

I'm painting the outer hull on my 22' Cavalier Dory and I've been having problems with specs of debris in a sprayed on finish. The look is very shiney so the blemishes stand out. Sanded out these tiny bumps and a few sags as I've been learning how to spray. A friend of mine said not to worry about i...
by stefan
Mon Apr 14, 2008 7:22 am
Forum: Odds & Ends
Topic: instruments
Replies: 4
Views: 6457

instruments

I have a 1966 22' Cavalier Dory. Boat was sold with 4 gauges but I think the original had two. A tachometer and a combination; oil, amp. temp. I don't want to crowd the console dash and am looking for the two (2) gauges. Any ideas? stefan
by stefan
Mon Feb 26, 2007 10:27 pm
Forum: Finishing
Topic: '66 Dory floor
Replies: 1
Views: 2713

'66 Dory floor

O.K. more Dory inquiries. I removed all the floor sections (about 13 or so) and really put a lot of work into shoring them up. Epoxy fillers, primers, surface fillers, primers, top coats, etc. They are nice now. I am debating in my small mind whether to wrap them in deco dot vinyl OR paint them with...
by stefan
Mon Feb 26, 2007 10:13 pm
Forum: Cockpit and Cabin Interiors
Topic: '66 Cavalier Dory Center Console
Replies: 1
Views: 3927

'66 Cavalier Dory Center Console

I'm building a new center console with bench for my Dory. Anyone out there have any photos of the instrument panel. I have a set of 4 gauges but it looks like the original boats had just two gauges inside a kind of added on housing of recessed instruments on the top of the center console. I am very ...
by stefan
Mon Feb 26, 2007 10:00 pm
Forum: Odds & Ends
Topic: steering
Replies: 0
Views: 2545

steering

On my '66 Cavalier Dory project the steering would not budge. Started takin'stuff apart and was shoked to find I could separate the inner twisted wire cable from the cracked outer sheath. All gummed up. Cleaned off now. Works now. Question. It seems I can still use the outer sheath but I'd like to f...
by stefan
Tue Dec 05, 2006 12:26 pm
Forum: Finishing
Topic: Interior lapstrake painting
Replies: 6
Views: 6310

Bret: Thanks for the info concerning the bottom of the old Dory. Your words are exactly what had I had thought about. The bottom had been fairly well deteriorated on the inside surface so I really wanted to shore up that surface, make it smooth, etc. I know the flex may cause cracks. I will cover th...
by stefan
Mon Dec 04, 2006 10:27 am
Forum: Finishing
Topic: Interior lapstrake painting
Replies: 6
Views: 6310

Interior lapstrake painting

I'm a first time wood boat restorer and am obsessing a tad as my knowledge and experience are minimal. I've taken the interior walls of a '66 Cavalier Dory down to mostly bare wood. The lower boards and entire bilge have been infused with Abatron 2 part liquid epoxy followed by 2 part putty which wh...
by stefan
Fri Mar 24, 2006 10:49 am
Forum: How to Use Boat Buzz
Topic: Lack of Posts
Replies: 6
Views: 9486

1966 22' Cutless Dory

Hello: I'm new and just posted a couple questions in Hull Construction. I'm not certain where to yell for help so I thought I might repeat my questions here. I am restoring the old Dory which has a pretty solid hull and a re-built 283 with very low hours. Where do I find plans or drawings for the or...
by stefan
Fri Mar 24, 2006 10:29 am
Forum: Hull Construction
Topic: 1966 22' Cutless Dory project
Replies: 3
Views: 7969

1966 22' Cutless Dory project

Hello out there: I'm new to Chris Craft ownership and this site but am beginning what I hope will be an undertaking that leads to lots of great times on Lake Mendota in Madison, WI. I've been shoring up the interior of the hull on this old Dory. I'm a painting contractor by trade so I think I can do...