Active Unanswered
Search found 47 matches
- Sun Oct 23, 2016 6:45 pm
- Forum: Odds & Ends
- Topic: Classic Chris on Mackinac Island
- Replies: 7
- Views: 4847
Re: Classic Chris on Mackinac Island
The Marion Leigh belongs to the Musser family from the Grand Hotel fame. It is a 1955 53' Constellation. The "Essential Guide" has a picture of the 53' Constellation without a hard top, but 42 of this model were built so I would guess that it must have been an option on this large of a boat. The 54'...
- Wed May 04, 2016 8:00 am
- Forum: How to Use Boat Buzz
- Topic: Trailer
- Replies: 15
- Views: 8182
Re: Trailer
I would give Ryan Trailers a call in Portland. Little bit of a hike, but worth the trip. They are well versed in wood boat trailer construction.
- Fri Nov 20, 2015 2:13 pm
- Forum: Fiberglass - Research Related
- Topic: 1988 Chris-Craft Amerosport 320
- Replies: 2
- Views: 7433
Re: 1988 Chris-Craft Amerosport 320
there is a small forum on www.iboats.com. Maybe one of the owners on the forum would make a copy for you?? You may also try to discuss with a broker if you see one for sale on yachtworld. I would suspect a broker may help you out, for a small fee of course??? The only other option you would have is ...
- Fri Feb 27, 2015 2:08 pm
- Forum: Research Related
- Topic: Barrel Back DOT COM is back up!
- Replies: 2
- Views: 6860
Re: Barrel Back DOT COM is back up!
Don,
It will not allow me to add my hull #. It gives me an server error message when I try to submit my information. Also, you need to add model 104 and 105 to the 17ft. series. They are missing.
Once you fix that, I will add my #71769 to the site.
Thanks,
David De Horn
It will not allow me to add my hull #. It gives me an server error message when I try to submit my information. Also, you need to add model 104 and 105 to the 17ft. series. They are missing.
Once you fix that, I will add my #71769 to the site.
Thanks,
David De Horn
- Tue Dec 17, 2013 1:54 pm
- Forum: Hardware & Rigging
- Topic: Correct deck vents for 1940 17' Deluxe?
- Replies: 23
- Views: 12638
Re: Correct deck vents for 1940 17' Deluxe?
In addition to the 4 deck vents, and the fuel tank vent line terminating on the starboard side, starting with my hull #71769, the hole cut under the stern flag pole for ventilation was eliminated in lieu of the 4 deck vents. So, boats after 71769, will not have a deck hole vent cut under the stern p...
- Tue Oct 15, 2013 1:37 pm
- Forum: Cockpit and Cabin Interiors
- Topic: Michigan Upolstery restoration co. recommendations
- Replies: 5
- Views: 4158
Re: Michigan Upolstery restoration co. recommendations
Steve,
Where did you get your Aquamarine interior material? I have a 1941, 17 deluxe as well, and I am searching for the proper materials. Thanks, David
Where did you get your Aquamarine interior material? I have a 1941, 17 deluxe as well, and I am searching for the proper materials. Thanks, David
- Wed Feb 27, 2013 6:15 pm
- Forum: Odds & Ends
- Topic: Trailer Decisions
- Replies: 49
- Views: 17482
I would offer this advice. If your boat is under 20ft. you should NOT get a tandem trailer. The maximum load capacity for a single axle trailer is well above the loaded weight of a small runabout. It is critical that the weight of the boat "use" the springs and let the springs cushion the ride. If y...
- Tue Oct 02, 2012 9:05 am
- Forum: Chris-Craft Today
- Topic: New Chris-Craft 20ft. Vertical Bow for 2013 - NEEDS A NAME
- Replies: 62
- Views: 56739
- Mon Oct 01, 2012 3:41 pm
- Forum: Chris-Craft Today
- Topic: New Chris-Craft 20ft. Vertical Bow for 2013 - NEEDS A NAME
- Replies: 62
- Views: 56739
- Mon Aug 13, 2012 2:17 pm
- Forum: Chris-Craft Antique Boat Club Business
- Topic: Fall 2011 Brass Bell
- Replies: 41
- Views: 18140
- Mon Aug 13, 2012 12:32 pm
- Forum: Chris-Craft Antique Boat Club Business
- Topic: Fall 2011 Brass Bell
- Replies: 41
- Views: 18140
- Sun May 08, 2011 12:58 pm
- Forum: Cockpit and Cabin Interiors
- Topic: Interior for 1940-42 17' Deluxe Barrel!! Who wants original?
- Replies: 14
- Views: 13554
Aqua Marine
Don,
I am in as well with the 1941 Aqua Marine. My hull is #71769.
Let me know how things are progressing.
David
I am in as well with the 1941 Aqua Marine. My hull is #71769.
Let me know how things are progressing.
David
- Tue Sep 08, 2009 10:03 am
- Forum: Odds & Ends
- Topic: Looking for leaks
- Replies: 19
- Views: 10472
- Mon Jul 20, 2009 9:18 am
- Forum: Shows, Museums, & Event Locations
- Topic: Port City Boat Show Muskegon, MI
- Replies: 0
- Views: 2298
Port City Boat Show Muskegon, MI
Just a quick note to let everyone that did not attend the Muskegon Port City Vintage Boat Show this past weekend, it was a great success. Jeff Rogers did a great job coordinating this show, so hats off to Jeff. We had very COLD weather 55-65 degress, and a NW wind blowing at 20-25, but that did not ...
- Mon Jul 20, 2009 9:08 am
- Forum: Engines & Powertrain
- Topic: Exhaust Smell In Pre War Cockpit
- Replies: 50
- Views: 16633
Al, Sorry for the late reply, as i have been trying to use my boat over the last week. My boat 71769, does have the rear seat barriers in the bilge to enclose the engine room. From my research and discussions with previous owners, I believe this to be original. since everything else on the boat (UGH...
- Tue Jul 14, 2009 9:10 am
- Forum: Engines & Powertrain
- Topic: Exhaust Smell In Pre War Cockpit
- Replies: 50
- Views: 16633
Matt, I have asked this exact question in the past. My boat has exactly the same thing. So, I guess it is good to know that it is "normal????" My 1941 17, is hull number 71769, the first one with the 4 vents, and the copper fuel line vent tube to the gas tank. The 4 vents don't help a bit. I just sa...
- Wed May 20, 2009 3:58 pm
- Forum: Finishing
- Topic: Deck Seam Painting Technique
- Replies: 21
- Views: 13380
- Wed May 20, 2009 2:07 pm
- Forum: Finishing
- Topic: Deck Seam Painting Technique
- Replies: 21
- Views: 13380
- Mon May 18, 2009 4:11 pm
- Forum: Finishing
- Topic: Deck Seam Painting Technique
- Replies: 21
- Views: 13380
Deck Seam Painting Technique
Getting ready to paint the deck seams. Can I get a poll on what people do? How many of you have taped the seams, and how did that look?? Did you have nice crisp lines? Or how many of you use a Buegler line painter?
I know they are expensive, but are they worth it?
Thanks!
I know they are expensive, but are they worth it?
Thanks!
- Sun May 17, 2009 7:01 pm
- Forum: Hull Construction
- Topic: Soaking and Leaking
- Replies: 3
- Views: 3766
Thanks Steve, I would love to have access to a boat house. I don't. I live in Chicago, and the boat is used in Michigan on the weekends, so it is soaked in the spring very well, then it is used on the weekends. So, the problem does lie in the fact that it is in and out. Tough conditions. I am planni...
- Sat May 16, 2009 11:05 am
- Forum: Hull Construction
- Topic: Soaking and Leaking
- Replies: 3
- Views: 3766
Soaking and Leaking
I have a 17ft. barrelback, and it needs a new bottom. I am planning a new bottom next winter. However, in the meantime, I am trying to squeak a couple more summers out of the bottom. My bottom leaks when fully soaked. I have it timed down to about 30 seconds of bilge pump running every 30-45 minutes...
- Fri Apr 24, 2009 10:15 am
- Forum: Finishing
- Topic: Topside Finish Repair
- Replies: 3
- Views: 3234
- Wed Apr 22, 2009 3:10 pm
- Forum: Finishing
- Topic: Topside Finish Repair
- Replies: 3
- Views: 3234
Topside Finish Repair
I am hoping to get some suggestion on how to best repair a small spot on the top side of my boat. While docked last year at a show, a bolt sticking out of a dock, scraped the varnish of a small area of the side of my boat down to the bare wood. I sanded this area, but am having a terrible time tryin...
- Thu Jan 29, 2009 2:34 pm
- Forum: Fiberglass - Research Related
- Topic: Does any body know about a Wellcraft 196-XP
- Replies: 8
- Views: 17926
Genmar Michigan
The production for Wellcraft has officially moved to Cadillac, Michigan. The plant is now referred to as Genmar Michigan since there are more than Four Winns built there now. As for a few particulars, the Stinger series was a boat that Wellcraft built in 1980 and 1981 but it was a 165. The Stingers ...
- Thu Jan 29, 2009 2:04 pm
- Forum: Hardware & Rigging
- Topic: Correct deck vents for 1940 17' Deluxe?
- Replies: 23
- Views: 12638
Confirmation on the deck vents on 71769
Just as an aside, I own hull number 71769. Coincidentally, I did see the actual engineering change notices while at Russ Arrand's shop two days ago. Brian is correct, as are the engineering change notices starting with 71769. My boat has four deck vents along with the fuel tank vent from the top of ...
- Mon Nov 24, 2008 9:47 am
- Forum: Odds & Ends
- Topic: Woody in Kid Rock Video
- Replies: 5
- Views: 7189
- Fri Oct 17, 2008 12:07 pm
- Forum: Odds & Ends
- Topic: 1940's Chris Craft Dealer in Miami?
- Replies: 9
- Views: 6510
- Thu Oct 16, 2008 12:19 pm
- Forum: Odds & Ends
- Topic: 1940's Chris Craft Dealer in Miami?
- Replies: 9
- Views: 6510
- Thu Oct 16, 2008 11:57 am
- Forum: Odds & Ends
- Topic: 1940's Chris Craft Dealer in Miami?
- Replies: 9
- Views: 6510
1940's Chris Craft Dealer in Miami?
My boat was delivered to Miami in 1941, and I am trying to research the history of my boat. I have the paperwork from the Mariners Museum also. I know this is a longshot, but is there any documentation out there that would tell me who the dealer in Miami was at that time? Or any possbile leads? At t...
- Mon Oct 13, 2008 9:51 am
- Forum: Cockpit and Cabin Interiors
- Topic: Gauge Panel Trim Pieces
- Replies: 5
- Views: 3591
Gauge Panel Trim Pieces
Here's a question for the experts. I have a 1941 17ft. Deluxe Runabout, and I have the gray faced gauges. In addition, I have two gold trim strips that run horizontally across the gauge panel (dashboard). My question is are these gold strips correct? I have seen silver strips, and gold, so which is ...