Active Active   Unanswered Unanswered

CC Porthole Rod Support

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Tmalko
Posts: 64
Joined: Mon Oct 08, 2018 5:31 am
Contact:

CC Porthole Rod Support

Post by Tmalko » Mon Nov 22, 2021 10:31 am

I’m looking for a picture or drawing of a small part that is the base for the stand up rod for a Chris Craft Cruiser porthole or where I might find a replacement or to build one if simple. Not the rod hinge or rod secure clip but the separate piece that the rod goes into when extended and keeping the porthole open. I have attached a photo or two. Thanks.
D6A2EB25-E283-485D-AB95-80935B05A90E.jpeg
Base for rod standup support
D6A2EB25-E283-485D-AB95-80935B05A90E.jpeg
Base for rod standup support
D6A2EB25-E283-485D-AB95-80935B05A90E.jpeg
Base for rod standup support
D6A2EB25-E283-485D-AB95-80935B05A90E.jpeg
Base for rod standup support

Tmalko
Posts: 64
Joined: Mon Oct 08, 2018 5:31 am
Contact:

Re: CC Porthole Rod Support

Post by Tmalko » Sat Jan 15, 2022 12:20 am

After 1400 views no response. Maybe there is a smaller population of CC cruiser owners with a porthole than I thought. :) A friend was able to provide a picture of the rod support. See attachments. A small item that doesn’t get noticed I guess. I will make one out of some 1|2 inch steel pipe.
Attachments
C647F2B8-E97E-457D-9C21-193A70F71A84.jpeg
3B41DCF1-76B6-41C8-B1EC-FED43F0FCC3C.jpeg

User avatar
Captain Nemo
Posts: 730
Joined: Tue Jul 07, 2009 7:40 pm
Location: Lyons, NY
Contact:

Re: CC Porthole Rod Support

Post by Captain Nemo » Sat Jan 15, 2022 8:43 am

Glad to see one. Mine sits precariously in a notch on the edge of the wood. I wondered what was supposed to be there. I think that it was removed because it looks like it might cause some interference when clambering in and out of the hatch.
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.

User avatar
JimF
Club Executive Team
Posts: 637
Joined: Mon Nov 14, 2005 10:48 am
Location: Austin, TX
Contact:

Re: CC Porthole Rod Support

Post by JimF » Sat Jan 15, 2022 9:58 am

Mine also sits in a little notch. Maybe that is how they came?
1930 Chris-Craft Model 100 20' "MOXIE"
1940 Chris-Craft Red and White 25' "Old Paint"
1946 Chris-Craft Sportsman 25' "CinCity"

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests