I have a KLC 120hp. It idles just fine. But when I get to the top 1/3 of the throttle - it will not increase in speed or power at all. The top 1/3 of the throttle does nothing other than rotate the throttle stick.
Any suggestions?
Active Unanswered
throttle adjustment
Moderators: Don Ayers, Al Benton, Don Vogt
- Captain Nemo
- Posts: 730
- Joined: Tue Jul 07, 2009 7:40 pm
- Location: Lyons, NY
- Contact:
Throttle adjust
Hi,
How many RPM's are you getting out of it? If it has a throttle cable, the inner cable could have a kink in it near the carb end of it. If it has a mechanical linkage you could check where it connects on the shaft to the butterfly in the carb. Just a couple of thoughts without looking at it.
-Mark
How many RPM's are you getting out of it? If it has a throttle cable, the inner cable could have a kink in it near the carb end of it. If it has a mechanical linkage you could check where it connects on the shaft to the butterfly in the carb. Just a couple of thoughts without looking at it.
-Mark
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.
Who is online
Users browsing this forum: No registered users and 20 guests