windshield parts

[seastrake]

Me and my son purchased a 1967 33' cavalier seastrake, looking for port side windshield lever and lock.

[Doug P]

On ebay continuously

[jfrprops]

I have the exact same boat, 66 model....I can help you with most anything since I have done most everything?
sadly...I don't have those windshield parts but like previous poster said....on ebay frequently.

contact me direct if you need anything advice wise.

you have a great, strong, revolutionary boat......

John in Va.

[Doug P]

Roamer Semi Enclosed Cruiser.pdf

(119.97 KiB) Downloaded 125 times

Roamer Semi Enclosed Cruiser.pdf

(119.97 KiB) Downloaded 125 times

Am trying to square both port and stbd window screens. Over the last few years I have tried weights on concrete floors, cedar wedges. The wood and glass are all original.

IDEAS WILL BE APPRECIATED AND BOAT NAMED AFTER YOU.


I WILL NOT CALL IT THE BOY TROY

[seastrake]

Thanks John, will keep in contact

[ballardMike]

We have a '67 Futura 33'... all same but for hull. A problem we have is corroded hinge at top of port window... frame opens a bit only because the top has some bend. Cracked the glass trying to go past that bend. =\

You guys had that problem w/ hinges? ..and do you know of a good remedy other than complete rebuild?

[jfrprops]

Have not had THAT problem...but had most others......shame it broke.

Need to run a line of duct tape, like a gutter, under the joint in the hinge and saturate the hinge joint with PB blaster....

I am sorry I don't have that part from cavs I have cut up for parts....

John in Va.