Active Active   Unanswered Unanswered

Table of Offsets 1956 17' Sportsman

Framing, planking and fairing. Repair, or reconstruction. If it's hull related, you'll find it here.

Moderators: Don Ayers, Al Benton, Don Vogt

[email protected]
Posts: 19
Joined: Wed Sep 01, 2021 5:22 pm
Location: Massachusetts
Contact:

Table of Offsets 1956 17' Sportsman

Post by [email protected] » Wed Dec 22, 2021 2:10 pm

I have a couple questions about the table of offsets for a 1956 17' Sportsman.

1. Heights from Rabbet - where exactly is the Rabbet measurement? I assume somewhere on the keel.

2.Buttock-15" - I assumed this is 15" from the keel centerline, but the measurements don't seem to jive with the existing frames.

3. Frame Symmetry - the existing frames do not appear to be symmetric side to side. I think they should be. The problem I have is knowing which side is right. If I can figure out the Buttock height, I should be able to determine the correct frame shape.

Any help with this would be very helpful.

Thanks,

Greg

Who is online

Users browsing this forum: No registered users and 3 guests