Active Active   Unanswered Unanswered

1971 XK22 control box shifter

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Warvette
Posts: 4
Joined: Sat Jan 15, 2022 12:43 pm
Location: Georgia
Contact:

1971 XK22 control box shifter

Post by Warvette » Fri Jan 21, 2022 6:39 pm

Im looking for the Marmac M-1093-D2 controller with chrome handle with two piece teak wood handgrip. I have read on this forum that there is two different controllers. An early one that may have the Marmac name on it and had a 1/2 inch shaft splines. A later version I have that only has the M-1093-D2 stamped on it and not Marmac. It has a 3/4 inch shaft spline. I’m looking for one or both. Any functional set up that has the chrome curved handle and two piece teak wood hand grip. The early Marmac also had a chrome round plate that went between the chrome handle and the interior side panel. Need that plate also.

ccfan2010
Posts: 14
Joined: Fri Oct 30, 2009 11:21 pm
Location: Glendora, CA
Contact:

Re: 1971 XK22 control box shifter

Post by ccfan2010 » Wed Feb 02, 2022 2:28 pm

Is this the controller you are looking for? I don't have the lever but I do see them on ebay every so often. Let me know if this is what you are looking for.
Attachments
1093.jpg
IMG_0975.jpg
"Hen's Teeth"
1971 Lancer 23' Offshore

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests