Page 1 of 1
CC Logo Position
Posted: Fri Jan 01, 2021 4:38 pm
by Tmalko
I have a 1957 CC 27’ Sedan with flying bridge. The Chris Craft logo is offset as shown in photo. Have you seen this before, before I modify it to an in line configuration? Thank you.
Re: CC Logo Position
Posted: Fri Jan 01, 2021 5:19 pm
by Tmalko
Chris *
Craft
Re: CC Logo Position
Posted: Sat Jan 02, 2021 4:09 am
by Tmalko
Tmalko wrote: ↑Fri Jan 01, 2021 4:38 pm
I have a 1957 CC 27’ Sedan with flying bridge. The Chris Craft logo is offset as shown in photo. Have you seen this before, before I modify it to an in line configuration? Thank you.
Re: CC Logo Position
Posted: Sat Jan 02, 2021 9:11 am
by Captain Nemo
I have not seen the logo applied other than in line. I would post a picture of my Sedan w/ Flybridge, but I think the file is too big. Not tech savvy enough to make it smaller
Re: CC Logo Position
Posted: Sat Jan 02, 2021 10:18 am
by drrot
Here is the way it is in THE ESSENTIAL GUIDE [attachment=0]27sedan.jpg[/attachment]
Re: CC Logo Position
Posted: Sat Jan 02, 2021 12:03 pm
by Tmalko
Thanks for your input and photos. Appreciate it. Not sure why they did it that way. Something I will be changing. I wanted to make sure I was not missing something. Yes my photo must be too big as well. I will try a reduced size and see if that works.
Re: CC Logo Position
Posted: Sat Jan 02, 2021 12:25 pm
by Tmalko
Photo attachment maybe.
- CC logo photo
- 7284F4A8-A793-44C2-A52E-ABBE1C26555D.jpeg (25.48 KiB) Viewed 4957 times